lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] usb: core: Add runtime resume checking
Hi Peter,

On 10 August 2016 at 14:18, Peter Chen <hzpeterchen@gmail.com> wrote:
> On Wed, Aug 10, 2016 at 10:33:31AM +0800, Baolin Wang wrote:
>> Hi Greg,
>>
>> On 9 August 2016 at 18:26, Greg KH <gregkh@linuxfoundation.org> wrote:
>> > On Tue, Aug 09, 2016 at 05:33:33PM +0800, Baolin Wang wrote:
>> >> When the usb device has entered suspend state by runtime suspend method, and
>> >> the sustem also try to enter suspend state by issuing usb_dev_suspend(), it
>> >> will issue pm_runtime_resume() function to deal with wrong wakeup setting in
>> >> choose_wakeup() function.
>> >>
>> >> But if usb device resumes failed due to xhci has been into suspend state and
>> >> hardware is not accessible, which will set runtime errors. Thus when there is
>> >> slave attached, usb device will resume failed by runtime resume method due to
>> >> previous runtime errors.
>> >
>> > I really can't parse the first sentance in this paragraph, what exactly
>> > makes xhci so "unique" here?
>>
>> Sorry for confusing, I try to explain it clearly. Considering strict
>> power management for mobile device, we should also power off the usb
>> controller if there are no slaves attached even though it is usb host
>> function.
>>
>> For example: No slave attached----> usb interface runtime suspend
>> ----> usb device runtime suspend -----> xhci suspend -----> power off
>> usb controller. After that if the system wants to enter suspend state,
>> then it also will issue usb_dev_suspend(), then the
>> pm_runtime_resume() function (issued in choose_wakeup() function) will
>> return -ESHUTDOWN due to xhci has been suspend and hardware is not
>> accessible.
>
> Why the controller does not be resumed when the root hub has issued
> runtime resume?

Because now there is no slave attached, we will not power on usb
controller and resume xhci.

>
> Peter
>
>>
>> After system entering resume state, if there is slave attached ---->
>> power on usb controller -----> xhci resume -----> usb device runtime
>> resume ----> usb interface runtime resume. Usb device will resume
>> failed if runtime errors is set (-ESHUTDOWN), thus we should clear the
>> runtime errors in choose_wakeup() function to avoid this situation.
>>
>> >
>> >> Then we should check if it resumes successfully in choose_wakeup() function,
>> >
>> > what is "it"?
>>
>> It present pm_runtime_resume() issued in choose_wakeup() function.
>>
>> >
>> >> if it failed we should clear the runtime errors by pm_runtime_set_suspended()
>> >> function to avoid runtime resume failure.
>> >
>> > Again, what is "it"?
>>
>> It present pm_runtime_resume() issued in choose_wakeup() function.
>>
>> >
>> >>
>> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> >> ---
>> >> drivers/usb/core/driver.c | 9 +++++++--
>> >> 1 file changed, 7 insertions(+), 2 deletions(-)
>> >>
>> >> diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
>> >> index dadd1e8d..a1a0f5f 100644
>> >> --- a/drivers/usb/core/driver.c
>> >> +++ b/drivers/usb/core/driver.c
>> >> @@ -1412,6 +1412,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
>> >> static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
>> >> {
>> >> int w;
>> >> + int ret;
>> >>
>> >> /* Remote wakeup is needed only when we actually go to sleep.
>> >> * For things like FREEZE and QUIESCE, if the device is already
>> >> @@ -1431,8 +1432,12 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
>> >> /* If the device is autosuspended with the wrong wakeup setting,
>> >> * autoresume now so the setting can be changed.
>> >> */
>> >> - if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
>> >> - pm_runtime_resume(&udev->dev);
>> >> + if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup) {
>> >> + ret = pm_runtime_resume(&udev->dev);
>> >> + if (ret == -ESHUTDOWN)
>> >> + pm_runtime_set_suspended(&udev->dev);
>> >
>> > why is 'ret' needed:
>> > if (pm_runtime_resume(&udev->dev) == -ESHUTDOWN)
>>
>> OK. I can modify it in next version if you agree this patch.
>>
>> >
>> >
>> > Why would resume fail?
>>
>> Like I explained above. Thanks.
>>
>> --
>> Baolin.wang
>> Best Regards
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
>
> Best Regards,
> Peter Chen



--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2016-08-10 22:41    [W:2.581 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site