lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] ARM: dts: STiH407-pinctrl: Update gpio-cells to 2
Date
From: Patrice Chotard <patrice.chotard@st.com>

This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 52 +++++++++++++++++-----------------
1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..5653840 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@

pio0: gpio@09610000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -66,7 +66,7 @@
};
pio1: gpio@09611000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@
};
pio2: gpio@09612000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@
};
pio3: gpio@09613000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@
};
pio4: gpio@09614000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@

pio5: gpio@09615000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -373,7 +373,7 @@

pio10: pio@09200000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -381,7 +381,7 @@
};
pio11: pio@09201000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -389,7 +389,7 @@
};
pio12: pio@09202000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -397,7 +397,7 @@
};
pio13: pio@09203000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -405,7 +405,7 @@
};
pio14: pio@09204000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -413,7 +413,7 @@
};
pio15: pio@09205000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -421,7 +421,7 @@
};
pio16: pio@09206000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x100>;
@@ -429,7 +429,7 @@
};
pio17: pio@09207000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x100>;
@@ -437,7 +437,7 @@
};
pio18: pio@09208000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x100>;
@@ -445,7 +445,7 @@
};
pio19: pio@09209000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x100>;
@@ -930,7 +930,7 @@

pio20: pio@09210000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -951,7 +951,7 @@

pio30: gpio@09220000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -959,7 +959,7 @@
};
pio31: gpio@09221000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -967,7 +967,7 @@
};
pio32: gpio@09222000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -975,7 +975,7 @@
};
pio33: gpio@09223000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -983,7 +983,7 @@
};
pio34: gpio@09224000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -991,7 +991,7 @@
};
pio35: gpio@09225000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -1090,7 +1090,7 @@

pio40: gpio@09230000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
@@ -1098,7 +1098,7 @@
};
pio41: gpio@09231000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -1106,7 +1106,7 @@
};
pio42: gpio@09232000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
--
1.9.1
\
 
 \ /
  Last update: 2016-08-10 22:41    [W:0.121 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site