lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/4] mfd: lp873x: Add lp873x PMIC support
On Wed, 10 Aug 2016, Keerthy wrote:

>
>
> On Tuesday 09 August 2016 06:23 PM, Lee Jones wrote:
> > On Mon, 08 Aug 2016, Keerthy wrote:
> >
> > > The LP873X chip is a power management IC for Portable Navigation Systems
> > > and Tablet Computing devices. It contains the following components:
> > >
> > > - Regulators.
> > > - Configurable General Purpose Output Signals(GPO).
> > >
> > > PMIC interacts with the main processor through i2c. PMIC has
> > > couple of LDOs(Linear Regulators), couple of BUCKs (Step-Down DC-DC
> > > Converter Cores) and GPOs(General Purpose Output Signals).
> > >
> > > Signed-off-by: Keerthy <j-keerthy@ti.com>
> > > ---
> > > Changes in v6:
> > >
> > > * Rebased on top of http://www.gossamer-threads.com/lists/linux/kernel/2457552.
> > > * Hence added probe_new instead of probe and removed unused i2c_device_id.
> >
> > No, please don't do that. This patch-set is blocked.
> >
> > Please rebase on top of a mainline release and re-send.
> >
> > We still need the I2C table, for now.
>
> Okay. Guess i did some testing for that series then :-P.
> I will revert only that and send patch[es [2-4].

I'm happy for you to reply with your Tested-by:

> > > Changes in v4:
> > >
> > > * Added Author.
> > > * Added the mfd_cell for gpio.
> > >
> > > Changes in v3:
> > >
> > > * Reordered the probe code.
> > > * Fixed Typo in Kconfig description.
> > > * Removed unused member from struct lp873x.
> > >
> > > drivers/mfd/Kconfig | 14 +++
> > > drivers/mfd/Makefile | 2 +
> > > drivers/mfd/lp873x.c | 89 +++++++++++++++
> > > include/linux/mfd/lp873x.h | 264 +++++++++++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 369 insertions(+)
> > > create mode 100644 drivers/mfd/lp873x.c
> > > create mode 100644 include/linux/mfd/lp873x.h
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 2d1fb64..45fe00a 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1224,6 +1224,20 @@ config MFD_TPS65217
> > > This driver can also be built as a module. If so, the module
> > > will be called tps65217.
> > >
> > > +config MFD_TI_LP873X
> > > + tristate "TI LP873X Power Management IC"
> > > + depends on I2C
> > > + select MFD_CORE
> > > + select REGMAP_I2C
> > > + help
> > > + If you say yes here then you get support for the LP873X series of
> > > + Power Management Integrated Circuits(PMIC).
> > > + These include voltage regulators, Thermal protection, Configurable
> > > + General Purpose Outputs(GPO) that are used in portable devices.
> > > +
> > > + This driver can also be built as a module. If so, the module
> > > + will be called lp873x.
> > > +
> > > config MFD_TPS65218
> > > tristate "TI TPS65218 Power Management chips"
> > > depends on I2C
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index 2ba3ba3..42acbcd 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
> > > obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
> > > obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
> > >
> > > +obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o
> > > +
> > > obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
> > > obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
> > > obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
> > > diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
> > > new file mode 100644
> > > index 0000000..3c8e8d0
> > > --- /dev/null
> > > +++ b/drivers/mfd/lp873x.c
> > > @@ -0,0 +1,89 @@
> > > +/*
> > > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> > > + *
> > > + * Author: Keerthy <j-keerthy@ti.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation version 2.
> > > + *
> > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > > + * kind, whether express or implied; without even the implied warranty
> > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#include <linux/interrupt.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#include <linux/mfd/lp873x.h>
> > > +
> > > +static const struct regmap_config lp873x_regmap_config = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = LP873X_REG_MAX,
> > > +};
> > > +
> > > +static const struct mfd_cell lp873x_cells[] = {
> > > + { .name = "lp873x-regulator", },
> > > + { .name = "lp873x-gpio", },
> > > +};
> > > +
> > > +static int lp873x_probe(struct i2c_client *client)
> > > +{
> > > + struct lp873x *lp873;
> > > + int ret;
> > > + unsigned int otpid;
> > > +
> > > + lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
> > > + if (!lp873)
> > > + return -ENOMEM;
> > > +
> > > + lp873->dev = &client->dev;
> > > +
> > > + lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
> > > + if (IS_ERR(lp873->regmap)) {
> > > + ret = PTR_ERR(lp873->regmap);
> > > + dev_err(lp873->dev,
> > > + "Failed to initialize register map: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + mutex_init(&lp873->lock);
> > > +
> > > + ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
> > > + if (ret) {
> > > + dev_err(lp873->dev, "Failed to read OTP ID\n");
> > > + return ret;
> > > + }
> > > +
> > > + lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
> > > + i2c_set_clientdata(client, lp873);
> > > + ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
> > > + ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct of_device_id of_lp873x_match_table[] = {
> > > + { .compatible = "ti,lp8733", },
> > > + { .compatible = "ti,lp8732", },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
> > > +
> > > +static struct i2c_driver lp873x_driver = {
> > > + .driver = {
> > > + .name = "lp873x",
> > > + .of_match_table = of_lp873x_match_table,
> > > + },
> > > + .probe_new = lp873x_probe,
> > > +};
> > > +module_i2c_driver(lp873x_driver);
> > > +
> > > +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
> > > +MODULE_DESCRIPTION("LP873X chip family multi-function driver");
> > > +MODULE_LICENSE("GPL v2");
> > > diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h
> > > new file mode 100644
> > > index 0000000..42bebfa
> > > --- /dev/null
> > > +++ b/include/linux/mfd/lp873x.h
> > > @@ -0,0 +1,264 @@
> > > +/*
> > > + * Functions to access LP873X power management chip.
> > > + *
> > > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation version 2.
> > > + *
> > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > > + * kind, whether express or implied; without even the implied warranty
> > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#ifndef __LINUX_MFD_LP873X_H
> > > +#define __LINUX_MFD_LP873X_H
> > > +
> > > +#include <linux/i2c.h>
> > > +#include <linux/regulator/driver.h>
> > > +#include <linux/regulator/machine.h>
> > > +
> > > +/* LP873x chip id list */
> > > +#define LP873X 0x00
> > > +
> > > +/* All register addresses */
> > > +#define LP873X_REG_DEV_REV 0X00
> > > +#define LP873X_REG_OTP_REV 0X01
> > > +#define LP873X_REG_BUCK0_CTRL_1 0X02
> > > +#define LP873X_REG_BUCK0_CTRL_2 0X03
> > > +#define LP873X_REG_BUCK1_CTRL_1 0X04
> > > +#define LP873X_REG_BUCK1_CTRL_2 0X05
> > > +#define LP873X_REG_BUCK0_VOUT 0X06
> > > +#define LP873X_REG_BUCK1_VOUT 0X07
> > > +#define LP873X_REG_LDO0_CTRL 0X08
> > > +#define LP873X_REG_LDO1_CTRL 0X09
> > > +#define LP873X_REG_LDO0_VOUT 0X0A
> > > +#define LP873X_REG_LDO1_VOUT 0X0B
> > > +#define LP873X_REG_BUCK0_DELAY 0X0C
> > > +#define LP873X_REG_BUCK1_DELAY 0X0D
> > > +#define LP873X_REG_LDO0_DELAY 0X0E
> > > +#define LP873X_REG_LDO1_DELAY 0X0F
> > > +#define LP873X_REG_GPO_DELAY 0X10
> > > +#define LP873X_REG_GPO2_DELAY 0X11
> > > +#define LP873X_REG_GPO_CTRL 0X12
> > > +#define LP873X_REG_CONFIG 0X13
> > > +#define LP873X_REG_PLL_CTRL 0X14
> > > +#define LP873X_REG_PGOOD_CTRL1 0X15
> > > +#define LP873X_REG_PGOOD_CTRL2 0X16
> > > +#define LP873X_REG_PG_FAULT 0X17
> > > +#define LP873X_REG_RESET 0X18
> > > +#define LP873X_REG_INT_TOP_1 0X19
> > > +#define LP873X_REG_INT_TOP_2 0X1A
> > > +#define LP873X_REG_INT_BUCK 0X1B
> > > +#define LP873X_REG_INT_LDO 0X1C
> > > +#define LP873X_REG_TOP_STAT 0X1D
> > > +#define LP873X_REG_BUCK_STAT 0X1E
> > > +#define LP873X_REG_LDO_STAT 0x1F
> > > +#define LP873X_REG_TOP_MASK_1 0x20
> > > +#define LP873X_REG_TOP_MASK_2 0x21
> > > +#define LP873X_REG_BUCK_MASK 0x22
> > > +#define LP873X_REG_LDO_MASK 0x23
> > > +#define LP873X_REG_SEL_I_LOAD 0x24
> > > +#define LP873X_REG_I_LOAD_2 0x25
> > > +#define LP873X_REG_I_LOAD_1 0x26
> > > +
> > > +#define LP873X_REG_MAX LP873X_REG_I_LOAD_1
> > > +
> > > +/* Register field definitions */
> > > +#define LP873X_DEV_REV_DEV_ID 0xC0
> > > +#define LP873X_DEV_REV_ALL_LAYER 0x30
> > > +#define LP873X_DEV_REV_METAL_LAYER 0x0F
> > > +
> > > +#define LP873X_OTP_REV_OTP_ID 0xFF
> > > +
> > > +#define LP873X_BUCK0_CTRL_1_BUCK0_FPWM BIT(3)
> > > +#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2)
> > > +#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1)
> > > +#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0)
> > > +
> > > +#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38
> > > +#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07
> > > +
> > > +#define LP873X_BUCK1_CTRL_1_BUCK1_FPWM BIT(3)
> > > +#define LP873X_BUCK1_CTRL_1_BUCK1_RDIS_EN BIT(2)
> > > +#define LP873X_BUCK1_CTRL_1_BUCK1_EN_PIN_CTRL BIT(1)
> > > +#define LP873X_BUCK1_CTRL_1_BUCK1_EN BIT(0)
> > > +
> > > +#define LP873X_BUCK1_CTRL_2_BUCK1_ILIM 0x38
> > > +#define LP873X_BUCK1_CTRL_2_BUCK1_SLEW_RATE 0x07
> > > +
> > > +#define LP873X_BUCK0_VOUT_BUCK0_VSET 0xFF
> > > +
> > > +#define LP873X_BUCK1_VOUT_BUCK1_VSET 0xFF
> > > +
> > > +#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2)
> > > +#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1)
> > > +#define LP873X_LDO0_CTRL_LDO0_EN BIT(0)
> > > +
> > > +#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2)
> > > +#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1)
> > > +#define LP873X_LDO1_CTRL_LDO1_EN BIT(0)
> > > +
> > > +#define LP873X_LDO0_VOUT_LDO0_VSET 0x1F
> > > +
> > > +#define LP873X_LDO1_VOUT_LDO1_VSET 0x1F
> > > +
> > > +#define LP873X_BUCK0_DELAY_BUCK0_SD_DELAY 0xF0
> > > +#define LP873X_BUCK0_DELAY_BUCK0_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_BUCK1_DELAY_BUCK1_SD_DELAY 0xF0
> > > +#define LP873X_BUCK1_DELAY_BUCK1_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_LDO0_DELAY_LDO0_SD_DELAY 0xF0
> > > +#define LP873X_LDO0_DELAY_LDO0_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_LDO1_DELAY_LDO1_SD_DELAY 0xF0
> > > +#define LP873X_LDO1_DELAY_LDO1_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_GPO_DELAY_GPO_SD_DELAY 0xF0
> > > +#define LP873X_GPO_DELAY_GPO_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_GPO2_DELAY_GPO2_SD_DELAY 0xF0
> > > +#define LP873X_GPO2_DELAY_GPO2_SU_DELAY 0x0F
> > > +
> > > +#define LP873X_GPO_CTRL_GPO2_OD BIT(6)
> > > +#define LP873X_GPO_CTRL_GPO2_EN_PIN_CTRL BIT(5)
> > > +#define LP873X_GPO_CTRL_GPO2_EN BIT(4)
> > > +#define LP873X_GPO_CTRL_GPO_OD BIT(2)
> > > +#define LP873X_GPO_CTRL_GPO_EN_PIN_CTRL BIT(1)
> > > +#define LP873X_GPO_CTRL_GPO_EN BIT(0)
> > > +
> > > +#define LP873X_CONFIG_SU_DELAY_SEL BIT(6)
> > > +#define LP873X_CONFIG_SD_DELAY_SEL BIT(5)
> > > +#define LP873X_CONFIG_CLKIN_PIN_SEL BIT(4)
> > > +#define LP873X_CONFIG_CLKIN_PD BIT(3)
> > > +#define LP873X_CONFIG_EN_PD BIT(2)
> > > +#define LP873X_CONFIG_TDIE_WARN_LEVEL BIT(1)
> > > +#define LP873X_EN_SPREAD_SPEC BIT(0)
> > > +
> > > +#define LP873X_PLL_CTRL_EN_PLL BIT(6)
> > > +#define LP873X_EXT_CLK_FREQ 0x1F
> > > +
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_POL BIT(7)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_OD BIT(6)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOW_LDO BIT(5)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOWN_BUCK BIT(4)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO1 BIT(3)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO0 BIT(2)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK1 BIT(1)
> > > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK0 BIT(0)
> > > +
> > > +#define LP873X_PGOOD_CTRL2_EN_PGOOD_TWARN BIT(2)
> > > +#define LP873X_PGOOD_CTRL2_EN_PG_FAULT_GATE BIT(1)
> > > +#define LP873X_PGOOD_CTRL2_PGOOD_MODE BIT(0)
> > > +
> > > +#define LP873X_PG_FAULT_PG_FAULT_LDO1 BIT(3)
> > > +#define LP873X_PG_FAULT_PG_FAULT_LDO0 BIT(2)
> > > +#define LP873X_PG_FAULT_PG_FAULT_BUCK1 BIT(1)
> > > +#define LP873X_PG_FAULT_PG_FAULT_BUCK0 BIT(0)
> > > +
> > > +#define LP873X_RESET_SW_RESET BIT(0)
> > > +
> > > +#define LP873X_INT_TOP_1_PGOOD_INT BIT(7)
> > > +#define LP873X_INT_TOP_1_LDO_INT BIT(6)
> > > +#define LP873X_INT_TOP_1_BUCK_INT BIT(5)
> > > +#define LP873X_INT_TOP_1_SYNC_CLK_INT BIT(4)
> > > +#define LP873X_INT_TOP_1_TDIE_SD_INT BIT(3)
> > > +#define LP873X_INT_TOP_1_TDIE_WARN_INT BIT(2)
> > > +#define LP873X_INT_TOP_1_OVP_INT BIT(1)
> > > +#define LP873X_INT_TOP_1_I_MEAS_INT BIT(0)
> > > +
> > > +#define LP873X_INT_TOP_2_RESET_REG_INT BIT(0)
> > > +
> > > +#define LP873X_INT_BUCK_BUCK1_PG_INT BIT(6)
> > > +#define LP873X_INT_BUCK_BUCK1_SC_INT BIT(5)
> > > +#define LP873X_INT_BUCK_BUCK1_ILIM_INT BIT(4)
> > > +#define LP873X_INT_BUCK_BUCK0_PG_INT BIT(2)
> > > +#define LP873X_INT_BUCK_BUCK0_SC_INT BIT(1)
> > > +#define LP873X_INT_BUCK_BUCK0_ILIM_INT BIT(0)
> > > +
> > > +#define LP873X_INT_LDO_LDO1_PG_INT BIT(6)
> > > +#define LP873X_INT_LDO_LDO1_SC_INT BIT(5)
> > > +#define LP873X_INT_LDO_LDO1_ILIM_INT BIT(4)
> > > +#define LP873X_INT_LDO_LDO0_PG_INT BIT(2)
> > > +#define LP873X_INT_LDO_LDO0_SC_INT BIT(1)
> > > +#define LP873X_INT_LDO_LDO0_ILIM_INT BIT(0)
> > > +
> > > +#define LP873X_TOP_STAT_PGOOD_STAT BIT(7)
> > > +#define LP873X_TOP_STAT_SYNC_CLK_STAT BIT(4)
> > > +#define LP873X_TOP_STAT_TDIE_SD_STAT BIT(3)
> > > +#define LP873X_TOP_STAT_TDIE_WARN_STAT BIT(2)
> > > +#define LP873X_TOP_STAT_OVP_STAT BIT(1)
> > > +
> > > +#define LP873X_BUCK_STAT_BUCK1_STAT BIT(7)
> > > +#define LP873X_BUCK_STAT_BUCK1_PG_STAT BIT(6)
> > > +#define LP873X_BUCK_STAT_BUCK1_ILIM_STAT BIT(4)
> > > +#define LP873X_BUCK_STAT_BUCK0_STAT BIT(3)
> > > +#define LP873X_BUCK_STAT_BUCK0_PG_STAT BIT(2)
> > > +#define LP873X_BUCK_STAT_BUCK0_ILIM_STAT BIT(0)
> > > +
> > > +#define LP873X_LDO_STAT_LDO1_STAT BIT(7)
> > > +#define LP873X_LDO_STAT_LDO1_PG_STAT BIT(6)
> > > +#define LP873X_LDO_STAT_LDO1_ILIM_STAT BIT(4)
> > > +#define LP873X_LDO_STAT_LDO0_STAT BIT(3)
> > > +#define LP873X_LDO_STAT_LDO0_PG_STAT BIT(2)
> > > +#define LP873X_LDO_STAT_LDO0_ILIM_STAT BIT(0)
> > > +
> > > +#define LP873X_TOP_MASK_1_PGOOD_INT_MASK BIT(7)
> > > +#define LP873X_TOP_MASK_1_SYNC_CLK_MASK BIT(4)
> > > +#define LP873X_TOP_MASK_1_TDIE_WARN_MASK BIT(2)
> > > +#define LP873X_TOP_MASK_1_I_MEAS_MASK BIT(0)
> > > +
> > > +#define LP873X_TOP_MASK_2_RESET_REG_MASK BIT(0)
> > > +
> > > +#define LP873X_BUCK_MASK_BUCK1_PGF_MASK BIT(7)
> > > +#define LP873X_BUCK_MASK_BUCK1_PGR_MASK BIT(6)
> > > +#define LP873X_BUCK_MASK_BUCK1_ILIM_MASK BIT(4)
> > > +#define LP873X_BUCK_MASK_BUCK0_PGF_MASK BIT(3)
> > > +#define LP873X_BUCK_MASK_BUCK0_PGR_MASK BIT(2)
> > > +#define LP873X_BUCK_MASK_BUCK0_ILIM_MASK BIT(0)
> > > +
> > > +#define LP873X_LDO_MASK_LDO1_PGF_MASK BIT(7)
> > > +#define LP873X_LDO_MASK_LDO1_PGR_MASK BIT(6)
> > > +#define LP873X_LDO_MASK_LDO1_ILIM_MASK BIT(4)
> > > +#define LP873X_LDO_MASK_LDO0_PGF_MASK BIT(3)
> > > +#define LP873X_LDO_MASK_LDO0_PGR_MASK BIT(2)
> > > +#define LP873X_LDO_MASK_LDO0_ILIM_MASK BIT(0)
> > > +
> > > +#define LP873X_SEL_I_LOAD_CURRENT_BUCK_SELECT BIT(0)
> > > +
> > > +#define LP873X_I_LOAD_2_BUCK_LOAD_CURRENT BIT(0)
> > > +
> > > +#define LP873X_I_LOAD_1_BUCK_LOAD_CURRENT 0xFF
> > > +
> > > +#define LP873X_MAX_REG_ID LP873X_LDO_1
> > > +
> > > +/* Number of step-down converters available */
> > > +#define LP873X_NUM_BUCK 2
> > > +/* Number of LDO voltage regulators available */
> > > +#define LP873X_NUM_LDO 2
> > > +/* Number of total regulators available */
> > > +#define LP873X_NUM_REGULATOR (LP873X_NUM_BUCK + LP873X_NUM_LDO)
> > > +
> > > +enum lp873x_regulator_id {
> > > + /* BUCK's */
> > > + LP873X_BUCK_0,
> > > + LP873X_BUCK_1,
> > > + /* LDOs */
> > > + LP873X_LDO_0,
> > > + LP873X_LDO_1,
> > > +};
> > > +
> > > +/**
> > > + * struct lp873x - state holder for the lp873x driver
> > > + * Device data may be used to access the LP873X chip
> > > + */
> > > +struct lp873x {
> > > + struct device *dev;
> > > + u8 rev;
> > > + struct mutex lock; /* lock guarding the data structure */
> > > + struct regmap *regmap;
> > > +};
> > > +#endif /* __LINUX_MFD_LP873X_H */
> >

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-08-10 22:01    [W:0.074 / U:9.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site