lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 01/16] remoteproc: st_slim_rproc: add a slimcore rproc driver
On Mon 01 Aug 10:10 PDT 2016, Peter Griffin wrote:

Sorry for the slow response, but I have a few more (small) concerns.

[..]
> diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
[..]
> +static int slim_rproc_start(struct rproc *rproc)
> +{
> + struct device *dev = &rproc->dev;
> + struct st_slim_rproc *slim_rproc = rproc->priv;
> + unsigned long hw_id, hw_ver, fw_rev;
> + u32 val;
> + int ret;
> +
> + ret = slim_clk_enable(slim_rproc);
> + if (ret) {
> + dev_err(dev, "Failed to enable clocks\n");
> + goto err_clk;

Nit. just return ret here and have a static "return 0" at the bottom.

> + }
> +
> + /* disable CPU pipeline clock & reset cpu pipeline */
> + val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET;
> + writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
> +
> + /* disable SLIM core STBus sync */
> + writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST);
> +
> + /* enable cpu pipeline clock */
> + writel(!SLIM_CLK_GATE_DIS,
> + slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
> +
> + /* clear int & cmd mailbox */
> + writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST);
> + writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST);
> +
> + /* enable all channels cmd & int */
> + writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST);
> + writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST);
> +
> + /* enable cpu */
> + writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
> +
> + hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST);
> + hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST);
> +
> + fw_rev = readl(slim_rproc->mem[SLIM_DMEM].cpu_addr +
> + SLIM_REV_ID_OFST);
> +
> + dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
> + SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev),
> + hw_id, hw_ver);
> +
> +err_clk:
> + return ret;
> +}
> +
> +static int slim_rproc_stop(struct rproc *rproc)
> +{
> + struct st_slim_rproc *slim_rproc = rproc->priv;
> + u32 val;
> +
> + /* mask all (cmd & int) channels */
> + writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST);
> + writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST);
> +
> + /* disable cpu pipeline clock */
> + writel(SLIM_CLK_GATE_DIS
> + , slim_rproc->slimcore + SLIM_CLK_GATE_OFST);

Odd placement of ','

> +
> + writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
> +
> + val = readl(slim_rproc->slimcore + SLIM_EN_OFST);
> + if (val & SLIM_EN_RUN)
> + dev_warn(&rproc->dev, "Failed to disable SLIM");
> +
> + slim_clk_disable(slim_rproc);
> +
> + dev_dbg(&rproc->dev, "slim stopped\n");
> +
> + return 0;
> +}
> +
> +static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
> +{
> + struct st_slim_rproc *slim_rproc = rproc->priv;
> + void *va = NULL;
> + int i;
> +
> + for (i = 0; i < SLIM_MEM_MAX; i++) {
> + if (da != slim_rproc->mem[i].bus_addr)
> + continue;

Are you sure you want to enforce this being called with da == base? (I'm
not totally against it).

But you should probably double check that len is <= mem[i].size.

> + /* __force to make sparse happy with type conversion */
> + va = (__force void *)slim_rproc->mem[i].cpu_addr;
> + break;
> + }
> +
> + dev_dbg(&rproc->dev, "%s: da = 0x%llx len = 0x%x va = 0x%p\n",
> + __func__, da, len, va);
> +
> + return va;
> +}
> +
> +static struct rproc_ops slim_rproc_ops = {
> + .start = slim_rproc_start,
> + .stop = slim_rproc_stop,
> + .da_to_va = slim_rproc_da_to_va,
> +};
> +
> +/**
> + * Firmware handler operations: sanity, boot address, load ...
> + */
> +
> +static struct resource_table empty_rsc_tbl = {
> + .ver = 1,
> + .num = 0,
> +};
> +
> +static struct resource_table *slim_rproc_find_rsc_table(struct rproc *rproc,
> + const struct firmware *fw,
> + int *tablesz)
> +{
> + if (!fw)
> + return NULL;

I consider it a BUG in the core to get here with fw == NULL, so please
drop this.

> +
> + *tablesz = sizeof(empty_rsc_tbl);
> + return &empty_rsc_tbl;
> +}
> +
> +static struct resource_table *slim_rproc_find_loaded_rsc_table(struct rproc *rproc,
> + const struct firmware *fw)
> +{
> + if (!fw)
> + return NULL;
> +

fw can't be NULL, so please drop this check.

> + return &empty_rsc_tbl;

This function is supposed to return a pointer to the resource table as
it appears in the space of the running firmware, so that any vring
updates etc are visible to the remote.

As your firmware doesn't do this you should return NULL here, rather
than a pointer back to the fake resource table.

But rproc_find_loaded_rsc_table() will do the same if you omit the
reference in the fw_ops struct, so just make that NULL instead.

> +}
> +
> +static struct rproc_fw_ops slim_rproc_fw_ops = {
> + .find_rsc_table = slim_rproc_find_rsc_table,
> + .find_loaded_rsc_table = slim_rproc_find_loaded_rsc_table,
> +};
> +
> +
> +/**
> + * slim_rproc_alloc() - allocate and initialise slim rproc
> + * @pdev: Pointer to the platform_device struct
> + * @fw_name: Name of firmware for rproc to use
> + *
> + * Function for allocating and initialising a slim rproc for use by
> + * device drivers whose IP is based around the slim slim core. It
> + * obtains and enables any clocks required by the slim core and also
> + * ioremaps the various IO.
> + *
> + * Returns st_slim_rproc pointer or PTR_ERR() on error.
> + */
> +
> +struct st_slim_rproc *slim_rproc_alloc(struct platform_device *pdev,
> + char *fw_name)
> +{
> + struct device *dev = &pdev->dev;
> + struct st_slim_rproc *slim_rproc;
> + struct device_node *np = dev->of_node;
> + struct rproc *rproc;
> + struct resource *res;
> + int err, i;
> + const struct rproc_fw_ops *elf_ops;
> +
> + if (WARN_ON(!np || !fw_name))
> + return ERR_PTR(-EINVAL);
> +
> + if (!of_device_is_compatible(np, "st,slim-rproc"))
> + return ERR_PTR(-EINVAL);
> +
> + rproc = rproc_alloc(dev, np->name, &slim_rproc_ops,
> + fw_name, sizeof(*slim_rproc));
> + if (!rproc)
> + return ERR_PTR(-ENOMEM);
> +
> + rproc->has_iommu = false;
> +
> + slim_rproc = rproc->priv;
> + slim_rproc->rproc = rproc;
> +
> + elf_ops = rproc->fw_ops;
> + /* Use some generic elf ops */
> + slim_rproc_fw_ops.load = elf_ops->load;
> + slim_rproc_fw_ops.sanity_check = elf_ops->sanity_check;
> +
> + rproc->fw_ops = &slim_rproc_fw_ops;
> +
> + /* get imem and dmem */
> + for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
> +
> + res = platform_get_resource_byname
> + (pdev, IORESOURCE_MEM, mem_names[i]);

This is an odd line breakage.

> +
> + slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> + if (IS_ERR(slim_rproc->mem[i].cpu_addr)) {
> + dev_err(&pdev->dev, "devm_ioremap_resource failed\n");
> + err = PTR_ERR(slim_rproc->mem[i].cpu_addr);
> + goto err;
> + }
> + slim_rproc->mem[i].bus_addr = res->start;
> + slim_rproc->mem[i].size = resource_size(res);
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore");
> +
> + slim_rproc->slimcore = devm_ioremap_resource(dev, res);
> + if (IS_ERR(slim_rproc->slimcore)) {
> + dev_err(&pdev->dev,
> + "devm_ioremap_resource failed for slimcore\n");
> + err = PTR_ERR(slim_rproc->slimcore);
> + goto err;
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals");
> +
> + slim_rproc->peri = devm_ioremap_resource(dev, res);
> + if (IS_ERR(slim_rproc->peri)) {
> + dev_err(&pdev->dev, "devm_ioremap_resource failed for peri\n");
> + err = PTR_ERR(slim_rproc->peri);
> + goto err;
> + }
> +
> + err = slim_clk_get(slim_rproc, dev);
> + if (err)
> + goto err;
> +
> + /* Register as a remoteproc device */
> + err = rproc_add(rproc);
> + if (err) {
> + dev_err(dev, "registration of slim remoteproc failed\n");
> + goto err_clk;
> + }
> +
> + return slim_rproc;
> +
> +err_clk:
> + for (i = 0; i < SLIM_MAX_CLK && slim_rproc->clks[i]; i++)
> + clk_put(slim_rproc->clks[i]);

Is there any chance to could acquire these clocks by name instead of
just picking up 4 "random" clocks from the DT node?

You are generally supposed to use clock-names and could then use
devm_clk_get() instead...

> +err:
> + rproc_put(rproc);
> + return ERR_PTR(err);
> +}
> +EXPORT_SYMBOL(slim_rproc_alloc);
> +
> +/**
> + * slim_rproc_put() - put slim rproc resources
> + * @slim_rproc: Pointer to the st_slim_rproc struct
> + *
> + * Function for calling respective _put() functions on
> + * slim_rproc resources.
> + *
> + */
> +void slim_rproc_put(struct st_slim_rproc *slim_rproc)
> +{
> + int clk;
> +
> + if (!slim_rproc)
> + return;
> +
> + for (clk = 0; clk < SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
> + clk_put(slim_rproc->clks[clk]);
> +

You need to rproc_del() here before calling rproc_put().

> + rproc_put(slim_rproc->rproc);
> +}
> +EXPORT_SYMBOL(slim_rproc_put);
> +
> +MODULE_AUTHOR("Peter Griffin");
> +MODULE_DESCRIPTION("STMicroelectronics SLIM rproc driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/remoteproc/st_slim_rproc.h b/include/linux/remoteproc/st_slim_rproc.h
> new file mode 100644
> index 0000000..c300b3e
> --- /dev/null
> +++ b/include/linux/remoteproc/st_slim_rproc.h
> @@ -0,0 +1,53 @@
> +/*
> + * st_slim_rproc.h
> + *
> + * Copyright (C) 2016 STMicroelectronics
> + * Author: Peter Griffin <peter.griffin@linaro.org>
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +#ifndef _ST_SLIM_H
> +#define _ST_SLIM_H
> +
> +#define SLIM_MEM_MAX 2
> +#define SLIM_MAX_CLK 4
> +
> +enum {
> + SLIM_DMEM,
> + SLIM_IMEM,
> +};
> +
> +/**
> + * struct slim_mem - slim internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: Bus address used to access the memory region
> + * @size: Size of the memory region
> + */
> +struct slim_mem {
> + void __iomem *cpu_addr;
> + phys_addr_t bus_addr;
> + size_t size;
> +};
> +

With things like slimbus being worked on I don't think it's appropriate
to introduce public constants named SLIM_* or slim_*. Please rename
these ST_SLIM_* and st_slim_*

> +/**
> + * struct st_slim_rproc - SLIM slim core
> + * @rproc: rproc handle
> + * @mem: slim memory information
> + * @slimcore: slim slimcore regs
> + * @peri: slim peripheral regs
> + * @clks: slim clocks
> + */
> +struct st_slim_rproc {
> + struct rproc *rproc;
> + struct slim_mem mem[SLIM_MEM_MAX];
> + void __iomem *slimcore;
> + void __iomem *peri;
> +
> + /* st_slim_rproc private */
> + struct clk *clks[SLIM_MAX_CLK];
> +};
> +
> +struct st_slim_rproc *slim_rproc_alloc(struct platform_device *pdev,
> + char *fw_name);
> +void slim_rproc_put(struct st_slim_rproc *slim_rproc);
> +
> +#endif

Regards,
Bjorn

\
 
 \ /
  Last update: 2016-08-10 22:01    [W:0.150 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site