lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[REGRESSION] 362899b ("macvtap: switch to use skb array") causes oops during teardown
I'm hitting the following oops during shutdown (halt command in guest)
of a libvirt-managed qemu guest 100% of the time:

[ 108.920486] Unable to handle kernel pointer dereference in virtual kernel address space
[ 108.920492] Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803
[ 108.920495] Fault in home space mode while using kernel ASCE.
[ 108.920504] AS:0000000000e20007 R3:0000000000000024
[ 108.920588] Oops: 0038 ilc:2 [#1] PREEMPT SMP
[ 108.920592] Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc ghash_s390 prng ecb aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common lockd grace vhost_net tun vhost macvtap macvlan kvm sunrpc dm_multipath dm_mod autofs4
[ 108.920628] CPU: 8 PID: 2648 Comm: qemu-system-s39 Not tainted 4.8.0-rc1-00031-gd3d312e #25
[ 108.920630] Hardware name: IBM 2964 NC9 704 (LPAR)
[ 108.920634] Krnl PSW : 0704e00180000000 000000000064a3e8 (kfree_skb+0x38/0x288)
[ 108.920640] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 000000009fb04a5f 00000007a7a37d48 6b6b6b6b6b6b6b6b 000003ff80721af0
[ 108.920645] 000000000078d626 00000007a7a34000 0000000000000000 0000000000000008
[ 108.920647] 00000007b0f04210 00000007bde65718 000003ff80721afa 6b6b6b6b6b6b6b6b
[ 108.920648] 00000007bde65698 0000000000807180 000003ff80721afa 00000007a7a37d08
[ 108.920656] Krnl Code: 000000000064a3da: b90400ae lgr %r10,%r14
000000000064a3de: b90400b2 lgr %r11,%r2
#000000000064a3e2: ec280121007c cgij %r2,0,8,64a624
>000000000064a3e8: 581020e4 l %r1,228(%r2)
000000000064a3ec: ec160005017e cij %r1,1,6,64a3f6
000000000064a3f2: a7f4000b brc 15,64a408
000000000064a3f6: a718ffff lhi %r1,-1
000000000064a3fa: eb1120e400f8 laa %r1,%r1,228(%r2)
[ 108.920673] Call Trace:
[ 108.920675] ([<00000007a7a37d28>] 0x7a7a37d28)
[ 108.920679] ([<000003ff80721afa>] macvtap_sock_destruct+0x92/0xa8 [macvtap])
[ 108.920681] ([<0000000000647026>] __sk_destruct+0x3e/0x1f0)
[ 108.920684] ([<000003ff80723ed8>] macvtap_release+0x150/0x1b0 [macvtap])
[ 108.920688] ([<000000000031bd72>] __fput+0x132/0x230)
[ 108.920691] ([<000000000015f7aa>] task_work_run+0xb2/0xe8)
[ 108.920695] ([<000000000078e494>] system_call+0xdc/0x270)
[ 108.920697] INFO: lockdep is turned off.
[ 108.920698] Last Breaking-Event-Address:
[ 108.920700] [<000003ff80721100>] 0x3ff80721100
[ 108.920703] Kernel panic - not syncing: Fatal exception: panic_on_oops

s390 host with a qeth device as the sole networking interface, one
network interface in the guest, using vhost (I can try to figure out
what libvirt is doing, if needed).

If I revert 362899b ("macvtap: switch to use skb array") and its
companion patch 0d7eacb ("macvtap: correctly free skb during socket
destruction"), starting a guest via libvirt and halting it again from
the guest works 100% of the time again.

I'm willing to collect debug info if you tell me what you need.

\
 
 \ /
  Last update: 2016-08-10 22:01    [W:0.075 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site