lkml.org 
[lkml]   [2016]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] kexec: Fix kdump failure with notsc
From
Date


On 07/07/2016 01:17 PM, Wei Jiangang wrote:
> If we specify the 'notsc' boot parameter for the dump-capture kernel,
> and then trigger a crash(panic) by using "ALT-SysRq-c" or "echo c >
> /proc/sysrq-trigger",
> the dump-capture kernel will hang in calibrate_delay_converge():
>
> /* wait for "start of" clock tick */
> ticks = jiffies;
> while (ticks == jiffies)
> ; /* nothing */
>
> serial log of the hang is as follows:
>
> tsc: Fast TSC calibration using PIT
> tsc: Detected 2099.947 MHz processor
> Calibrating delay loop...
>
> The reason is that the dump-capture kernel hangs in while loops and
> waits for jiffies to be updated, but no timer interrupts is passed
> to BSP by APIC.
>
> In fact, the local APIC was disabled in reboot and crash path by
> lapic_shutdown(). We need to put APIC in legacy mode in kexec jump path
> (put the system into PIT during the crash kernel),
> so that the dump-capture kernel can get timer interrupts.
>
> BTW,
> I found the buggy commit 522e66464467 ("x86/apic: Disable I/O APIC
> before shutdown of the local APIC") via bisection.
>
> Originally, I want to revert it.
> But Ingo Molnar comments that "By reverting the change can paper over
> the bug, but re-introduce the bug that can result in certain CPUs hanging
> if IO-APIC sends an APIC message if the lapic is disabled prematurely"
> And I think it's pertinent.
>
> Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
> ---
> arch/x86/include/asm/apic.h | 5 +++++
> arch/x86/kernel/apic/apic.c | 9 +++++++++
> arch/x86/kernel/machine_kexec_32.c | 5 ++---
> arch/x86/kernel/machine_kexec_64.c | 6 +++---
> 4 files changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
> index bc27611fa58f..5d7e635e580a 100644
> --- a/arch/x86/include/asm/apic.h
> +++ b/arch/x86/include/asm/apic.h
> @@ -128,6 +128,7 @@ extern void clear_local_APIC(void);
> extern void disconnect_bsp_APIC(int virt_wire_setup);
> extern void disable_local_APIC(void);
> extern void lapic_shutdown(void);
> +extern int lapic_disabled(void);



> extern void sync_Arb_IDs(void);
> extern void init_bsp_APIC(void);
> extern void setup_local_APIC(void);
> @@ -165,6 +166,10 @@ extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask);
>
> #else /* !CONFIG_X86_LOCAL_APIC */
> static inline void lapic_shutdown(void) { }
> +static inline int lapic_disabled(void)
> +{
> + return 0;
> +}
> #define local_apic_timer_c2_ok 1
> static inline void init_apic_mappings(void) { }
> static inline void disable_local_APIC(void) { }
> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
> index 60078a67d7e3..d1df250994bb 100644
> --- a/arch/x86/kernel/apic/apic.c
> +++ b/arch/x86/kernel/apic/apic.c
> @@ -133,6 +133,9 @@ static inline void imcr_apic_to_pic(void)
> }
> #endif
>
> +/* Local APIC is disabled by the kernel for crash or reboot path */
> +static int disabled_local_apic;

Your are using an int for a boolean value, please be more explicit by
declaring the variable as boolean and respectively changing all the
functions returning this value.

> +
> /*
> * Knob to control our willingness to enable the local APIC.
> *
> @@ -1097,10 +1100,16 @@ void lapic_shutdown(void)
> #endif
> disable_local_APIC();
>
> + disabled_local_apic = 1;
>
> local_irq_restore(flags);
> }
>
> +int lapic_disabled(void)
> +{
> + return disabled_local_apic;
> +}
> +
> /**
> * sync_Arb_IDs - synchronize APIC bus arbitration IDs
> */
> diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
> index 469b23d6acc2..c934a7868e6b 100644
> --- a/arch/x86/kernel/machine_kexec_32.c
> +++ b/arch/x86/kernel/machine_kexec_32.c
> @@ -202,14 +202,13 @@ void machine_kexec(struct kimage *image)
> local_irq_disable();
> hw_breakpoint_disable();
>
> - if (image->preserve_context) {
> + if (image->preserve_context || lapic_disabled()) {
> #ifdef CONFIG_X86_IO_APIC
> /*
> * We need to put APICs in legacy mode so that we can
> * get timer interrupts in second kernel. kexec/kdump
> * paths already have calls to disable_IO_APIC() in
> - * one form or other. kexec jump path also need
> - * one.
> + * one form or other. kexec jump path also need one.
> */
> disable_IO_APIC();
> #endif
> diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
> index 5a294e48b185..d3598cdd6437 100644
> --- a/arch/x86/kernel/machine_kexec_64.c
> +++ b/arch/x86/kernel/machine_kexec_64.c
> @@ -23,6 +23,7 @@
> #include <asm/pgtable.h>
> #include <asm/tlbflush.h>
> #include <asm/mmu_context.h>
> +#include <asm/apic.h>
> #include <asm/io_apic.h>
> #include <asm/debugreg.h>
> #include <asm/kexec-bzimage64.h>
> @@ -269,14 +270,13 @@ void machine_kexec(struct kimage *image)
> local_irq_disable();
> hw_breakpoint_disable();
>
> - if (image->preserve_context) {
> + if (image->preserve_context || lapic_disabled()) {
> #ifdef CONFIG_X86_IO_APIC
> /*
> * We need to put APICs in legacy mode so that we can
> * get timer interrupts in second kernel. kexec/kdump
> * paths already have calls to disable_IO_APIC() in
> - * one form or other. kexec jump path also need
> - * one.
> + * one form or other. kexec jump path also need one.
> */
> disable_IO_APIC();
> #endif
>

\
 
 \ /
  Last update: 2016-07-08 11:01    [W:0.129 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site