lkml.org 
[lkml]   [2016]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 03/22] usb: ulpi: Support device discovery via device properties
On Thu, Jul 07, 2016 at 03:20:54PM -0700, Stephen Boyd wrote:
> @@ -39,6 +42,10 @@ static int ulpi_match(struct device *dev, struct device_driver *driver)
> struct ulpi *ulpi = to_ulpi_dev(dev);
> const struct ulpi_device_id *id;
>
> + /* Some ULPI devices don't have a product id so rely on OF match */
> + if (ulpi->id.product == 0)
> + return of_driver_match_device(dev, driver);
> +

How about using vendor id? It can't be 0, but pid may be 0.
See: http://www.linux-usb.org/usb.ids

> +static int ulpi_of_register(struct ulpi *ulpi)
> +{
> + struct device_node *np = NULL, *child;
> +
> + /* Find a ulpi bus underneath the parent or the parent of the parent */
> + if (ulpi->dev.parent->of_node)
> + np = of_find_node_by_name(ulpi->dev.parent->of_node, "ulpi");
> + else if (ulpi->dev.parent->parent && ulpi->dev.parent->parent->of_node)
> + np = of_find_node_by_name(ulpi->dev.parent->parent->of_node,
> + "ulpi");
> + if (!np)
> + return 0;
> +
> + child = of_get_next_available_child(np, NULL);
> + if (!child)
> + return -EINVAL;

You may need to call of_node_put on parent (np), not on child node
below.

> +
> + ulpi->dev.of_node = child;
> +
> + return 0;
> +}
> +
> +static int ulpi_read_id(struct ulpi *ulpi)
> {
> int ret;
>
> @@ -174,14 +218,39 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
> ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
>
> + return 0;
> +}
> +

What does this API for? Why it still needs to be called after
vid/pid gets from firmware?

> +static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> +{
> + int ret;
> +
> ulpi->dev.parent = dev;
> ulpi->dev.bus = &ulpi_bus;
> ulpi->dev.type = &ulpi_dev_type;
> dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
>
> + if (IS_ENABLED(CONFIG_OF)) {
> + ret = ulpi_of_register(ulpi);
> + if (ret)
> + return ret;
> + }
> +
> ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
>
> - request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
> + ret = device_property_read_u16(&ulpi->dev, "ulpi-vendor",
> + &ulpi->id.vendor);
> + ret |= device_property_read_u16(&ulpi->dev, "ulpi-product",
> + &ulpi->id.product);
> + if (ret) {
> + ret = ulpi_read_id(ulpi);
> + if (ret)
> + return ret;
> + }
> +
[...]

> void ulpi_unregister_interface(struct ulpi *ulpi)
> {
> + of_node_put(ulpi->dev.of_node);

[...]

--

Best Regards,
Peter Chen

\
 
 \ /
  Last update: 2016-07-08 12:01    [W:0.122 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site