lkml.org 
[lkml]   [2016]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.6 21/31] usb: musb: Stop bulk endpoint while queue is rotated
Date
4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Goodbody <andrew.goodbody@cambrionix.com>

commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream.

Ensure that the endpoint is stopped by clearing REQPKT before
clearing DATAERR_NAKTIMEOUT before rotating the queue on the
dedicated bulk endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning
about such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly
ACKed which meant the host and device got out of sync.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/musb/musb_host.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -995,9 +995,15 @@ static void musb_bulk_nak_timeout(struct
if (is_in) {
dma = is_dma_capable() ? ep->rx_channel : NULL;

- /* clear nak timeout bit */
+ /*
+ * Need to stop the transaction by clearing REQPKT first
+ * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED
+ * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2
+ */
rx_csr = musb_readw(epio, MUSB_RXCSR);
rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
rx_csr &= ~MUSB_RXCSR_DATAERROR;
musb_writew(epio, MUSB_RXCSR, rx_csr);


\
 
 \ /
  Last update: 2016-07-07 04:21    [W:0.129 / U:3.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site