lkml.org 
[lkml]   [2016]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND RFC PATCH 1/5] platform: x86: add driver for UP Board I/O CPLD
Date
The UP board utilises a CPLD between its Intel X5-Z8350 SoC and an
external 40-pin header, to provide buffered voltage level-shifting
of the I/O signals, mux switching and LED control, and programmable
pin mapping between the SoC and the external pin header.

gpio, pinctrl and led drivers are provided in separate commits
to manage the functions provided by that CPLD.

This commit registers a platform driver to manage the configuration
of the CPLD itself.

Signed-off-by: Dan O'Donovan <dan@emutex.com>
---
drivers/platform/x86/up_board_cpld.c | 560 +++++++++++++++++++++++++++++++++++
drivers/platform/x86/up_board_cpld.h | 38 +++
2 files changed, 598 insertions(+)
create mode 100644 drivers/platform/x86/up_board_cpld.c
create mode 100644 drivers/platform/x86/up_board_cpld.h

diff --git a/drivers/platform/x86/up_board_cpld.c b/drivers/platform/x86/up_board_cpld.c
new file mode 100644
index 0000000..dc36d6a
--- /dev/null
+++ b/drivers/platform/x86/up_board_cpld.c
@@ -0,0 +1,560 @@
+/*
+ * UP Board I/O Header CPLD driver.
+ *
+ * Copyright (c) 2016, Emutex Ltd. All rights reserved.
+ *
+ * Author: Dan O'Donovan <dan@emutex.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+
+#include "up_board_cpld.h"
+#include "up_board_pinctrl.h"
+#include "up_board_gpio.h"
+#include "up_board_leds.h"
+
+/*
+ * The UP Board features an external 40-pin header for I/O functions including
+ * GPIO, I2C, UART, SPI, PWM and I2S, similar in layout to the Raspberry Pi 2.
+ * At the heart of the UP Board is an Intel X5-Z8350 "Cherry Trail" SoC, which
+ * provides the I/O functions for these pins at 1.8V logic levels.
+ *
+ * Additional buffers and mux switches are used between the SoC and the I/O pin
+ * header to convert between the 1.8V SoC I/O and the 3.3V levels required at
+ * the pin header, with sufficient current source/sink capability for LV-TTL
+ * compatibility. These buffers and mux switches require run-time configuration
+ * based on the pin function or GPIO direction selected by the user.
+ *
+ * The purpose of this driver is to manage the complexity of the buffer
+ * configuration so that application code can transparently access the I/O
+ * functions on the external pins through standard kernel interfaces. It
+ * instantiates a gpio and pinctrl device, and effectively acts as a "shim"
+ * between application code and the underlying Cherry Trail GPIO driver.
+ */
+
+/* The Cherry Trail SoC has 4 independent GPIO pin controllers */
+#define SOC_GC_SW "INT33FF:00"
+#define SOC_GC_N "INT33FF:01"
+#define SOC_GC_E "INT33FF:02"
+#define SOC_GC_SE "INT33FF:03"
+
+#define SOC_GPIO(n, o, f) \
+ { \
+ .soc_gc_name = (n), \
+ .soc_gc_offset = (o), \
+ .soc_gpio_flags = (f), \
+ }
+#define SOC_GPIO_INPUT(c, o) SOC_GPIO(c, o, GPIOF_IN)
+#define SOC_GPIO_OUTPUT(c, o) SOC_GPIO(c, o, GPIOF_OUT_INIT_LOW)
+
+#define GPIO_PIN_INFO(d, m, f) \
+ { \
+ .dir_ctrl_offset = (d), \
+ .mux_ctrl_offset = (m), \
+ .func_dir = (f), \
+ .func_enabled = false, \
+ }
+
+#define GPIO_PIN_INFO_NO_MUX(d, f) \
+ GPIO_PIN_INFO(d, UP_BOARD_UNASSIGNED, f)
+
+#define PIN_GROUP(n, p) \
+ { \
+ .name = (n), \
+ .pins = (p), \
+ .npin = ARRAY_SIZE((p)), \
+ }
+
+#define FUNCTION(n, g) \
+ { \
+ .name = (n), \
+ .groups = (g), \
+ .ngroup = ARRAY_SIZE((g)), \
+ }
+
+/* Initial configuration assumes all pins as GPIO inputs */
+#define CPLD_DIR_REG_INIT (0x00FFFFFFFULL)
+
+/* Internal context information for this driver */
+struct up_board_cpld {
+ struct device *dev;
+ struct platform_device *pinctrl_pdev;
+ struct platform_device *gpio_pdev;
+ struct platform_device *leds_pdev;
+ struct up_board_gpio_info strobe_gpio;
+ struct up_board_gpio_info reset_gpio;
+ struct up_board_gpio_info data_in_gpio;
+ struct up_board_gpio_info data_out_gpio;
+ struct up_board_gpio_info oe_gpio;
+ u64 dir_reg;
+ unsigned int dir_reg_size;
+ /* Lock to prevent concurrent access to CPLD */
+ spinlock_t lock;
+};
+
+static int up_board_cpld_reg_set_bit(struct up_board_cpld *cpld,
+ unsigned int offset, int value);
+
+static struct up_board_cpld up_board_cpld = {
+ .strobe_gpio = SOC_GPIO_OUTPUT(SOC_GC_N, 21),
+ .reset_gpio = SOC_GPIO_OUTPUT(SOC_GC_E, 15),
+ .data_in_gpio = SOC_GPIO_OUTPUT(SOC_GC_E, 13),
+ .data_out_gpio = SOC_GPIO_INPUT(SOC_GC_E, 23),
+ .oe_gpio = SOC_GPIO_OUTPUT(SOC_GC_SW, 43),
+ .dir_reg = CPLD_DIR_REG_INIT,
+ .dir_reg_size = 34,
+};
+
+/* Pin control information for the 28 GPIO pins on the UP Board I/O header */
+static struct up_board_pin_info up_board_pins[] = {
+ GPIO_PIN_INFO(9, 28, UP_BOARD_PDIR_OUT), /* 0 */
+ GPIO_PIN_INFO(23, 28, UP_BOARD_PDIR_OUT), /* 1 */
+ GPIO_PIN_INFO(0, 29, UP_BOARD_PDIR_OUT), /* 2 */
+ GPIO_PIN_INFO(1, 29, UP_BOARD_PDIR_OUT), /* 3 */
+ GPIO_PIN_INFO(2, 30, UP_BOARD_PDIR_IN), /* 4 */
+ GPIO_PIN_INFO_NO_MUX(10, UP_BOARD_PDIR_NONE), /* 5 */
+ GPIO_PIN_INFO_NO_MUX(11, UP_BOARD_PDIR_NONE), /* 6 */
+ GPIO_PIN_INFO_NO_MUX(22, UP_BOARD_PDIR_NONE), /* 7 */
+ GPIO_PIN_INFO_NO_MUX(21, UP_BOARD_PDIR_OUT), /* 8 */
+ GPIO_PIN_INFO_NO_MUX(7, UP_BOARD_PDIR_IN), /* 9 */
+ GPIO_PIN_INFO_NO_MUX(6, UP_BOARD_PDIR_OUT), /* 10 */
+ GPIO_PIN_INFO_NO_MUX(8, UP_BOARD_PDIR_OUT), /* 11 */
+ GPIO_PIN_INFO_NO_MUX(24, UP_BOARD_PDIR_OUT), /* 12 */
+ GPIO_PIN_INFO_NO_MUX(12, UP_BOARD_PDIR_OUT), /* 13 */
+ GPIO_PIN_INFO_NO_MUX(15, UP_BOARD_PDIR_OUT), /* 14 */
+ GPIO_PIN_INFO_NO_MUX(16, UP_BOARD_PDIR_IN), /* 15 */
+ GPIO_PIN_INFO_NO_MUX(25, UP_BOARD_PDIR_IN), /* 16 */
+ GPIO_PIN_INFO_NO_MUX(3, UP_BOARD_PDIR_OUT), /* 17 */
+ GPIO_PIN_INFO_NO_MUX(17, UP_BOARD_PDIR_OUT), /* 18 */
+ GPIO_PIN_INFO_NO_MUX(13, UP_BOARD_PDIR_OUT), /* 19 */
+ GPIO_PIN_INFO_NO_MUX(26, UP_BOARD_PDIR_IN), /* 20 */
+ GPIO_PIN_INFO_NO_MUX(27, UP_BOARD_PDIR_OUT), /* 21 */
+ GPIO_PIN_INFO_NO_MUX(5, UP_BOARD_PDIR_OUT), /* 22 */
+ GPIO_PIN_INFO_NO_MUX(18, UP_BOARD_PDIR_OUT), /* 23 */
+ GPIO_PIN_INFO_NO_MUX(19, UP_BOARD_PDIR_OUT), /* 24 */
+ GPIO_PIN_INFO_NO_MUX(20, UP_BOARD_PDIR_OUT), /* 25 */
+ GPIO_PIN_INFO_NO_MUX(14, UP_BOARD_PDIR_OUT), /* 26 */
+ GPIO_PIN_INFO_NO_MUX(4, UP_BOARD_PDIR_OUT), /* 27 */
+};
+
+/* SoC GPIO mapping for the 28 GPIO pins on the UP Board I/O header */
+static struct up_board_gpio_info up_board_gpios[] = {
+ SOC_GPIO(SOC_GC_SW, 33, 0), /* 0 */
+ SOC_GPIO(SOC_GC_SW, 37, 0), /* 1 */
+ SOC_GPIO(SOC_GC_SW, 32, 0), /* 2 */
+ SOC_GPIO(SOC_GC_SW, 35, 0), /* 3 */
+ SOC_GPIO(SOC_GC_E, 18, 0), /* 4 */
+ SOC_GPIO(SOC_GC_E, 21, 0), /* 5 */
+ SOC_GPIO(SOC_GC_E, 12, 0), /* 6 */
+ SOC_GPIO(SOC_GC_SE, 48, 0), /* 7 */
+ SOC_GPIO(SOC_GC_SE, 7, 0), /* 8 */
+ SOC_GPIO(SOC_GC_SE, 3, 0), /* 9 */
+ SOC_GPIO(SOC_GC_SE, 6, 0), /* 10 */
+ SOC_GPIO(SOC_GC_SE, 4, 0), /* 11 */
+ SOC_GPIO(SOC_GC_SE, 5, 0), /* 12 */
+ SOC_GPIO(SOC_GC_SE, 1, 0), /* 13 */
+ SOC_GPIO(SOC_GC_SW, 13, 0), /* 14 */
+ SOC_GPIO(SOC_GC_SW, 9, 0), /* 15 */
+ SOC_GPIO(SOC_GC_SW, 11, 0), /* 16 */
+ SOC_GPIO(SOC_GC_SW, 8, 0), /* 17 */
+ SOC_GPIO(SOC_GC_SW, 50, 0), /* 18 */
+ SOC_GPIO(SOC_GC_SW, 54, 0), /* 19 */
+ SOC_GPIO(SOC_GC_SW, 52, 0), /* 20 */
+ SOC_GPIO(SOC_GC_SW, 55, 0), /* 21 */
+ SOC_GPIO(SOC_GC_SE, 12, 0), /* 22 */
+ SOC_GPIO(SOC_GC_SE, 15, 0), /* 23 */
+ SOC_GPIO(SOC_GC_SE, 18, 0), /* 24 */
+ SOC_GPIO(SOC_GC_SE, 11, 0), /* 25 */
+ SOC_GPIO(SOC_GC_SE, 14, 0), /* 26 */
+ SOC_GPIO(SOC_GC_SE, 8, 0), /* 27 */
+};
+
+/* pinctrl descriptors for the 28 GPIO pins on the UP Board I/O header */
+static const struct pinctrl_pin_desc up_board_pinctrl_descs[] = {
+ PINCTRL_PIN(0, "I2C0_SDA"),
+ PINCTRL_PIN(1, "I2C0_SCL"),
+ PINCTRL_PIN(2, "I2C1_SDA"),
+ PINCTRL_PIN(3, "I2C1_SCL"),
+ PINCTRL_PIN(4, "ADC"),
+ PINCTRL_PIN(5, "GPIO5"),
+ PINCTRL_PIN(6, "GPIO6"),
+ PINCTRL_PIN(7, "SPI_CS1"),
+ PINCTRL_PIN(8, "SPI_CS0"),
+ PINCTRL_PIN(9, "SPI_MISO"),
+ PINCTRL_PIN(10, "SPI_MOSI"),
+ PINCTRL_PIN(11, "SPI_CLK"),
+ PINCTRL_PIN(12, "PWM0"),
+ PINCTRL_PIN(13, "PWM1"),
+ PINCTRL_PIN(14, "UART1_TX"),
+ PINCTRL_PIN(15, "UART1_RX"),
+ PINCTRL_PIN(16, "UART1_CTS"),
+ PINCTRL_PIN(17, "UART1_RTS"),
+ PINCTRL_PIN(18, "I2S_CLK"),
+ PINCTRL_PIN(19, "I2S_FRM"),
+ PINCTRL_PIN(20, "I2S_DIN"),
+ PINCTRL_PIN(21, "I2S_DOUT"),
+ PINCTRL_PIN(22, "GPIO22"),
+ PINCTRL_PIN(23, "GPIO23"),
+ PINCTRL_PIN(24, "GPIO24"),
+ PINCTRL_PIN(25, "GPIO25"),
+ PINCTRL_PIN(26, "GPIO26"),
+ PINCTRL_PIN(27, "GPIO27"),
+};
+
+static const unsigned int uart1_pins[] = { 14, 15, 16, 17 };
+static const unsigned int uart2_pins[] = { 25, 27 };
+static const unsigned int i2c0_pins[] = { 0, 1 };
+static const unsigned int i2c1_pins[] = { 2, 3 };
+static const unsigned int spi2_pins[] = { 8, 9, 10, 11 };
+static const unsigned int i2s2_pins[] = { 18, 19, 20, 21 };
+static const unsigned int pwm0_pins[] = { 12 };
+static const unsigned int pwm1_pins[] = { 13 };
+static const unsigned int adc0_pins[] = { 4 };
+
+static const struct up_board_pinctrl_group up_board_pinctrl_groups[] = {
+ PIN_GROUP("uart1_grp", uart1_pins),
+ PIN_GROUP("uart2_grp", uart2_pins),
+ PIN_GROUP("i2c0_grp", i2c0_pins),
+ PIN_GROUP("i2c1_grp", i2c1_pins),
+ PIN_GROUP("spi2_grp", spi2_pins),
+ PIN_GROUP("i2s2_grp", i2s2_pins),
+ PIN_GROUP("pwm0_grp", pwm0_pins),
+ PIN_GROUP("pwm1_grp", pwm1_pins),
+ PIN_GROUP("adc0_grp", adc0_pins),
+};
+
+static const char * const uart1_groups[] = { "uart1_grp" };
+static const char * const uart2_groups[] = { "uart2_grp" };
+static const char * const i2c0_groups[] = { "i2c0_grp" };
+static const char * const i2c1_groups[] = { "i2c1_grp" };
+static const char * const spi2_groups[] = { "spi2_grp" };
+static const char * const i2s2_groups[] = { "i2s2_grp" };
+static const char * const pwm0_groups[] = { "pwm0_grp" };
+static const char * const pwm1_groups[] = { "pwm1_grp" };
+static const char * const adc0_groups[] = { "adc0_grp" };
+
+static const struct up_board_pinctrl_function up_board_pinctrl_functions[] = {
+ FUNCTION("uart1", uart1_groups),
+ FUNCTION("uart2", uart2_groups),
+ FUNCTION("i2c0", i2c0_groups),
+ FUNCTION("i2c1", i2c1_groups),
+ FUNCTION("spi2", spi2_groups),
+ FUNCTION("i2s2", i2s2_groups),
+ FUNCTION("pwm0", pwm0_groups),
+ FUNCTION("pwm1", pwm1_groups),
+ FUNCTION("adc0", adc0_groups),
+};
+
+/* The CPLD controls the following 3 LEDs on the UP board */
+static struct up_board_led_info up_board_leds[] = {
+ { .cpld_offset = 31, .name = "upboard:yellow:", },
+ { .cpld_offset = 32, .name = "upboard:green:", },
+ { .cpld_offset = 33, .name = "upboard:red:", },
+};
+
+static struct up_board_pinctrl_pdata up_board_pinctrl_pdata = {
+ .cpld_info.cpld = &up_board_cpld,
+ .cpld_info.reg_set_bit = up_board_cpld_reg_set_bit,
+ .pins = up_board_pins,
+ .npin = ARRAY_SIZE(up_board_pins),
+ .descs = up_board_pinctrl_descs,
+ .ndesc = ARRAY_SIZE(up_board_pinctrl_descs),
+ .groups = up_board_pinctrl_groups,
+ .ngroup = ARRAY_SIZE(up_board_pinctrl_groups),
+ .functions = up_board_pinctrl_functions,
+ .nfunction = ARRAY_SIZE(up_board_pinctrl_functions),
+};
+
+static struct up_board_gpio_pdata up_board_gpio_pdata = {
+ .gpios = up_board_gpios,
+ .ngpio = ARRAY_SIZE(up_board_gpios),
+};
+
+static struct up_board_leds_pdata up_board_leds_pdata = {
+ .cpld_info.cpld = &up_board_cpld,
+ .cpld_info.reg_set_bit = up_board_cpld_reg_set_bit,
+ .leds = up_board_leds,
+ .nled = ARRAY_SIZE(up_board_leds),
+};
+
+/*
+ * On the UP board, the header pin level shifting and mux switching is
+ * controlled by a dedicated CPLD with proprietary firmware.
+ *
+ * The CPLD is responsible for connecting and translating 1.8V GPIO signals from
+ * the SoC to the 28 GPIO header pins at 3.3V, and for this it needs to be
+ * configured with direction (input/output) for each GPIO. In addition, it
+ * manages 3 mux switches (2 for I2C bus pins, 1 for ADC pin) which need to be
+ * configured on/off, and 3 LEDs. A register value is loaded into the CPLD to
+ * dynamically configure each of these.
+ */
+static int cpld_reg_update(struct up_board_cpld *cpld)
+{
+ u64 dir_reg_verify = 0;
+ int i;
+
+ /* Reset the CPLD internal counters */
+ gpiod_set_value(cpld->reset_gpio.soc_gpiod, 0);
+ gpiod_set_value(cpld->reset_gpio.soc_gpiod, 1);
+
+ /*
+ * Update the CPLD dir register
+ * data_in will be sampled on each rising edge of the strobe signal
+ */
+ for (i = cpld->dir_reg_size - 1; i >= 0; i--) {
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 0);
+ gpiod_set_value(cpld->data_in_gpio.soc_gpiod,
+ (cpld->dir_reg >> i) & 0x1);
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 1);
+ }
+
+ /*
+ * Read back and verify the value
+ * data_out will be set on each rising edge of the strobe signal
+ */
+ for (i = cpld->dir_reg_size - 1; i >= 0; i--) {
+ int data_out;
+
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 0);
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 1);
+ data_out = gpiod_get_value(cpld->data_out_gpio.soc_gpiod);
+ dir_reg_verify |= (u64)data_out << i;
+ }
+
+ if (dir_reg_verify != cpld->dir_reg) {
+ pr_err("CPLD verify error (expected: %llX, actual: %llX)\n",
+ cpld->dir_reg, dir_reg_verify);
+ return -EIO;
+ }
+
+ /* Issue a dummy STB cycle to latch the dir register updates */
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 0);
+ gpiod_set_value(cpld->strobe_gpio.soc_gpiod, 1);
+
+ return 0;
+}
+
+/**
+ * up_board_cpld_reg_set_bit() - update CPLD configuration
+ * @cpld: CPLD internal context info reference
+ * @offset: bit offset in CPLD register to set
+ * @value: boolean value to set in CPLD register bit selected by offset
+ *
+ * Return: Returns 0 if successful, or negative error value otherwise
+ */
+static int up_board_cpld_reg_set_bit(struct up_board_cpld *cpld,
+ unsigned int offset, int value)
+{
+ u64 old_regval;
+ int ret = 0;
+
+ spin_lock(&cpld->lock);
+
+ old_regval = cpld->dir_reg;
+
+ if (value)
+ cpld->dir_reg |= 1ULL << offset;
+ else
+ cpld->dir_reg &= ~(1ULL << offset);
+
+ /* Only update the CPLD register if it has changed */
+ if (cpld->dir_reg != old_regval)
+ ret = cpld_reg_update(cpld);
+
+ spin_unlock(&cpld->lock);
+
+ return ret;
+}
+
+static int up_gpiochip_match(struct gpio_chip *chip, void *data)
+{
+ return !strcmp(chip->label, data);
+}
+
+static int up_board_soc_gpio_setup(struct up_board_cpld *cpld,
+ struct up_board_gpio_info *gpio)
+{
+ gpio->soc_gc = gpiochip_find(gpio->soc_gc_name, up_gpiochip_match);
+ if (!gpio->soc_gc)
+ return -EPROBE_DEFER;
+
+ gpio->soc_gpio = gpio->soc_gc->base + gpio->soc_gc_offset;
+ gpio->soc_gpiod = gpio_to_desc(gpio->soc_gpio);
+ if (!gpio->soc_gpiod) {
+ dev_err(cpld->dev, "Failed to get descriptor for gpio %d\n",
+ gpio->soc_gpio);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int up_board_cpld_setup(struct up_board_cpld *cpld)
+{
+ struct up_board_gpio_info *cpld_gpios[] = {
+ &cpld->strobe_gpio,
+ &cpld->reset_gpio,
+ &cpld->data_in_gpio,
+ &cpld->data_out_gpio,
+ &cpld->oe_gpio,
+ };
+ int i, ret;
+
+ spin_lock_init(&cpld->lock);
+
+ /* Initialise the CPLD config input GPIOs as outputs, initially low */
+ for (i = 0; i < ARRAY_SIZE(cpld_gpios); i++) {
+ struct up_board_gpio_info *gpio = cpld_gpios[i];
+
+ ret = up_board_soc_gpio_setup(cpld, gpio);
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(cpld->dev, gpio->soc_gpio,
+ gpio->soc_gpio_flags,
+ dev_name(cpld->dev));
+ if (ret)
+ return ret;
+ }
+
+ /* Load initial CPLD configuration (all pins set for GPIO input) */
+ ret = cpld_reg_update(cpld);
+ if (ret) {
+ dev_err(cpld->dev, "CPLD initialisation failed\n");
+ return ret;
+ }
+
+ /* Enable the CPLD outputs after a valid configuration has been set */
+ gpiod_set_value(cpld->oe_gpio.soc_gpiod, 1);
+
+ return 0;
+}
+
+static int up_board_setup(struct up_board_cpld *cpld,
+ struct up_board_gpio_pdata *gpio_pdata)
+{
+ size_t i;
+ int ret;
+
+ /* Ensure the GPIO pins are configured as inputs initially */
+ for (i = 0; i < gpio_pdata->ngpio; i++) {
+ struct up_board_gpio_info *gpio = &gpio_pdata->gpios[i];
+
+ ret = up_board_soc_gpio_setup(cpld, gpio);
+ if (ret)
+ return ret;
+
+ ret = gpiod_direction_input(gpio->soc_gpiod);
+ if (ret) {
+ dev_err(cpld->dev, "GPIO direction init failed\n");
+ return ret;
+ }
+ }
+
+ return up_board_cpld_setup(cpld);
+}
+
+static int up_board_cpld_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct up_board_cpld *cpld = &up_board_cpld;
+ int ret;
+
+ cpld->dev = dev;
+ ret = up_board_setup(cpld, &up_board_gpio_pdata);
+ if (ret)
+ return ret;
+
+ cpld->pinctrl_pdev =
+ platform_device_register_data(dev, "up-board-pinctrl",
+ PLATFORM_DEVID_NONE,
+ &up_board_pinctrl_pdata,
+ sizeof(up_board_pinctrl_pdata));
+ if (IS_ERR(cpld->pinctrl_pdev)) {
+ ret = PTR_ERR(cpld->pinctrl_pdev);
+ goto fail_register_pinctrl_pdev;
+ }
+
+ cpld->gpio_pdev =
+ platform_device_register_data(dev, "up-board-gpio",
+ PLATFORM_DEVID_NONE,
+ &up_board_gpio_pdata,
+ sizeof(up_board_gpio_pdata));
+ if (IS_ERR(cpld->gpio_pdev)) {
+ ret = PTR_ERR(cpld->gpio_pdev);
+ goto fail_register_gpio_pdev;
+ }
+
+ cpld->leds_pdev =
+ platform_device_register_data(dev, "up-board-leds",
+ PLATFORM_DEVID_NONE,
+ &up_board_leds_pdata,
+ sizeof(up_board_leds_pdata));
+ if (IS_ERR(cpld->leds_pdev)) {
+ ret = PTR_ERR(cpld->leds_pdev);
+ goto fail_register_leds_pdev;
+ }
+
+ return 0;
+
+fail_register_leds_pdev:
+ platform_device_unregister(cpld->gpio_pdev);
+fail_register_gpio_pdev:
+ platform_device_unregister(cpld->pinctrl_pdev);
+fail_register_pinctrl_pdev:
+
+ return ret;
+}
+
+static int up_board_cpld_remove(struct platform_device *pdev)
+{
+ struct up_board_cpld *cpld = &up_board_cpld;
+
+ platform_device_unregister(cpld->leds_pdev);
+ platform_device_unregister(cpld->gpio_pdev);
+ platform_device_unregister(cpld->pinctrl_pdev);
+
+ /* Disable the CPLD outputs */
+ gpiod_set_value(cpld->oe_gpio.soc_gpiod, 0);
+
+ return 0;
+}
+
+static struct platform_driver up_board_cpld_driver = {
+ .driver.name = "up-board-cpld",
+ .driver.owner = THIS_MODULE,
+ .probe = up_board_cpld_probe,
+ .remove = up_board_cpld_remove,
+};
+
+static int __init up_board_cpld_init(void)
+{
+ return platform_driver_register(&up_board_cpld_driver);
+}
+subsys_initcall(up_board_cpld_init);
+
+static void __exit up_board_cpld_exit(void)
+{
+ platform_driver_unregister(&up_board_cpld_driver);
+}
+module_exit(up_board_cpld_exit);
+
+MODULE_AUTHOR("Dan O'Donovan <dan@emutex.com>");
+MODULE_DESCRIPTION("UP Board I/O Header CPLD driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:up-board-cpld");
diff --git a/drivers/platform/x86/up_board_cpld.h b/drivers/platform/x86/up_board_cpld.h
new file mode 100644
index 0000000..f635435
--- /dev/null
+++ b/drivers/platform/x86/up_board_cpld.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2016, Emutex Ltd. All rights reserved.
+ *
+ * Author: Dan O'Donovan <dan@emutex.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UP_BOARD_CPLD_H_
+#define _UP_BOARD_CPLD_H_
+
+/* Forward declaration to internal CPLD info structure */
+struct up_board_cpld;
+
+/**
+ * struct up_board_cpld_info - abstract interface for CPLD configuration
+ * @cpld: Opaque reference to internal CPLD info structure
+ * @reg_set_bit: Callback to update internal CPLD register bits
+ *
+ * Information passed to UP Board CPLD users to provide a method for updating
+ * the CPLD configuration register
+ */
+struct up_board_cpld_info {
+ struct up_board_cpld *cpld;
+ int (*reg_set_bit)(struct up_board_cpld *cpld,
+ unsigned int offset, int value);
+};
+
+#endif /* _UP_BOARD_CPLD_H_ */
--
2.1.4
\
 
 \ /
  Last update: 2016-07-04 19:01    [W:0.140 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site