lkml.org 
[lkml]   [2016]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v2 1/9] mailbox: Add Amlogic Meson Message-Handling-Unit
On Tue, Jun 21, 2016 at 3:32 PM, Neil Armstrong <narmstrong@baylibre.com> wrote:
> Add Amlogic Meson SoCs Message-Handling-Unit as mailbox controller
> with 2 independent channels/links to communicate with a remote processor.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/meson_mhu.c | 199 ++++++++++++++++++++++++++++++++++++++++++++
>
Can we call it pdev_mhu.c or similar so that some other platform using
the MHU as a platform_device wouldn't have to embarrassingly call it
'Meson's MHU'? And also the replace meson with that prefix in the
code.

> 2 files changed, 201 insertions(+)
> create mode 100644 drivers/mailbox/meson_mhu.c
>
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index 0be3e74..6aa9dbe 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -25,3 +25,5 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
> obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
>
> obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
> +
> +obj-$(CONFIG_ARCH_MESON) += meson_mhu.o
> diff --git a/drivers/mailbox/meson_mhu.c b/drivers/mailbox/meson_mhu.c
> new file mode 100644
> index 0000000..0576b92
> --- /dev/null
> +++ b/drivers/mailbox/meson_mhu.c
> @@ -0,0 +1,199 @@
> +/*
> + * Copyright (C) 2016 BayLibre SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + * Heavily based on meson_mhu.c from :
> + * Copyright (C) 2013-2015 Fujitsu Semiconductor Ltd.
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Jassi Brar <jaswinder.singh@linaro.org>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +#include <linux/mutex.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/mailbox_controller.h>
> +
> +#define INTR_SET_OFS 0x0
> +#define INTR_STAT_OFS 0x4
> +#define INTR_CLR_OFS 0x8
> +
> +#define MHU_LP_OFFSET 0x10
> +#define MHU_HP_OFFSET 0x1c
> +
> +#define TX_REG_OFFSET 0x24
> +
> +#define MHU_CHANS 2
> +
> +struct meson_mhu_link {
> + unsigned int irq;
> + void __iomem *tx_reg;
> + void __iomem *rx_reg;
> +};
> +
> +struct meson_mhu {
> + void __iomem *base;
> + struct meson_mhu_link mlink[MHU_CHANS];
> + struct mbox_chan chan[MHU_CHANS];
> + struct mbox_controller mbox;
> +};
> +
> +static irqreturn_t meson_mhu_rx_interrupt(int irq, void *p)
> +{
> + struct mbox_chan *chan = p;
> + struct meson_mhu_link *mlink = chan->con_priv;
> + u32 val;
> +
> + val = readl_relaxed(mlink->rx_reg + INTR_STAT_OFS);
> + if (!val)
> + return IRQ_NONE;
> +
> + mbox_chan_received_data(chan, (void *)&val);
> +
> + writel_relaxed(~0, mlink->rx_reg + INTR_CLR_OFS);
> +
How about sync with arm_mhu.c by doing writel_relaxed(val,
mlink->rx_reg + INTR_CLR_OFS) ?


> + return IRQ_HANDLED;
> +}
> +
> +static bool meson_mhu_last_tx_done(struct mbox_chan *chan)
> +{
> + struct meson_mhu_link *mlink = chan->con_priv;
> + u32 val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS);
> +
> + return (val == 0);
> +}
> +
> +static int meson_mhu_send_data(struct mbox_chan *chan, void *data)
> +{
> + struct meson_mhu_link *mlink = chan->con_priv;
> + u32 *arg = data;
> +
> + writel_relaxed(*arg, mlink->tx_reg + INTR_SET_OFS);
> +
> + return 0;
> +}
> +
> +static int meson_mhu_startup(struct mbox_chan *chan)
> +{
> + struct meson_mhu_link *mlink = chan->con_priv;
> + int ret;
> +
arm_mhu.c clears any pending TX before taking over by doing ...
val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS);
writel_relaxed(val, mlink->tx_reg + INTR_CLR_OFS);

> + ret = request_irq(mlink->irq, meson_mhu_rx_interrupt,
> + IRQF_ONESHOT, "meson_mhu_link", chan);
> + if (ret) {
> + dev_err(chan->mbox->dev,
> + "Unable to acquire IRQ %d\n", mlink->irq);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void meson_mhu_shutdown(struct mbox_chan *chan)
> +{
> + struct meson_mhu_link *mlink = chan->con_priv;
> +
> + free_irq(mlink->irq, chan);
> +}
> +
> +static const struct mbox_chan_ops meson_mhu_ops = {
> + .send_data = meson_mhu_send_data,
> + .startup = meson_mhu_startup,
> + .shutdown = meson_mhu_shutdown,
> + .last_tx_done = meson_mhu_last_tx_done,
> +};
>
My two comments above may not be necessary for your platform, but I
would suggest we keep the core (from the declaration of struct
meson_mhu_link to this point) in sync with arm_mhu.c

> +static int meson_mhu_probe(struct platform_device *pdev)
> +{
> + int i, err;
> + struct meson_mhu *mhu;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + int meson_mhu_reg[MHU_CHANS] = {MHU_LP_OFFSET, MHU_HP_OFFSET};
> +
> + /* Allocate memory for device */
> + mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
> + if (!mhu)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + mhu->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(mhu->base)) {
> + dev_err(dev, "ioremap failed\n");
> + return PTR_ERR(mhu->base);
> + }
> +
> + for (i = 0; i < MHU_CHANS; i++) {
> + mhu->chan[i].con_priv = &mhu->mlink[i];
> + mhu->mlink[i].irq = platform_get_irq(pdev, i);
> + if (mhu->mlink[i].irq < 0) {
> + dev_err(dev, "failed to get irq%d\n", i);
> + return mhu->mlink[i].irq;
> + }
> + mhu->mlink[i].rx_reg = mhu->base + meson_mhu_reg[i];
> + mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + TX_REG_OFFSET;
> + }
> +
> + mhu->mbox.dev = dev;
> + mhu->mbox.chans = &mhu->chan[0];
> + mhu->mbox.num_chans = MHU_CHANS;
> + mhu->mbox.ops = &meson_mhu_ops;
> + mhu->mbox.txdone_irq = false;
> + mhu->mbox.txdone_poll = true;
> + mhu->mbox.txpoll_period = 1;
> +
> + platform_set_drvdata(pdev, mhu);
> +
> + err = mbox_controller_register(&mhu->mbox);
> + if (err) {
> + dev_err(dev, "Failed to register mailboxes %d\n", err);
> + return err;
> + }
> +
> + dev_info(dev, "Meson MHU Mailbox registered\n");
> + return 0;
> +}
> +
> +static int meson_mhu_remove(struct platform_device *pdev)
> +{
> + struct meson_mhu *mhu = platform_get_drvdata(pdev);
> +
> + mbox_controller_unregister(&mhu->mbox);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_mhu_dt_ids[] = {
> + { .compatible = "amlogic,meson-gxbb-mhu", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, meson_mhu_ids);
> +
> +static struct platform_driver meson_wdt_driver = {
> + .probe = meson_mhu_probe,
> + .remove = meson_mhu_remove,
> + .driver = {
> + .name = "meson-mhu",
> + .of_match_table = meson_mhu_dt_ids,
> + },
> +};
> +
> +module_platform_driver(meson_wdt_driver);
> +
wdt as in watchdog-timer from drivers/watchdog/meson_wdt.c ? :)

Thanks.

\
 
 \ /
  Last update: 2016-07-04 18:21    [W:0.672 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site