lkml.org 
[lkml]   [2016]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: dts: am437x-sk-evm: disable DDR regulator in rtc-only/poweroff mode
Date
From: Tero Kristo <t-kristo@ti.com>

Without this, the memory will remain active during poweroff consuming
extra power. Please note revision 2.1 PMIC seems to fail when DCDC3
disable is attempted, so this is not done on that PMIC revision. The
PMIC revision checks in the regulator patches make sure of this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index b5e84e6..3af92b6 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -457,6 +457,9 @@
regulator-state-mem {
regulator-on-in-suspend;
};
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
};

dcdc4: regulator-dcdc4 {
--
1.9.1
\
 
 \ /
  Last update: 2016-07-04 09:21    [W:1.158 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site