lkml.org 
[lkml]   [2016]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v2 0/4] net: ethernet: Add support for gmii2rgmii converter
Date
This patch series does the following
---> Add support for gmii2rgmii converter.
---> Add support for gmii2rgmii converter in the macb driver.

The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
This core can be used in all three modes of operation(10/100/1000 Mb/s).
The Management Data Input/Output (MDIO) interface is used to configure the
Speed of operation. This core can switch dynamically between the three
Different speed modes by configuring the conveter register through mdio write.

The conveter sits b/w the MAC and external phy like below

MACB <==> GMII2RGMII <==> RGMII_PHY

MDIO <========> GMII2RGMII
MCAB <=======>
<========> RGMII

Using MAC MDIO bus we can access both the converter and the external PHY.
We need to program the line speed of the converter during run time based
On the external phy negotiated speed.

Kedareswara rao Appana (4):
Documentation: DT: net: Add Xilinx gmiitorgmii converter device tree
binding documentation
net: ethernet: xilinx: Add gmii2rgmii converter support
Documentation: DT: net: Update binding doc for gmiitorgmii conveter
net: macb: Add gmii2rgmii phy converter support

Documentation/devicetree/bindings/net/macb.txt | 4 ++
.../devicetree/bindings/net/xilinx_gmii2rgmii.txt | 31 +++++++++
drivers/net/ethernet/cadence/macb.c | 21 ++++++
drivers/net/ethernet/cadence/macb.h | 1 +
drivers/net/ethernet/xilinx/Kconfig | 8 +++
drivers/net/ethernet/xilinx/Makefile | 1 +
drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c | 79 ++++++++++++++++++++++
include/linux/xilinx_gmii2rgmii.h | 24 +++++++
8 files changed, 169 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
create mode 100644 drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
create mode 100644 include/linux/xilinx_gmii2rgmii.h

--
2.1.2

\
 
 \ /
  Last update: 2016-07-04 11:21    [W:0.075 / U:4.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site