lkml.org 
[lkml]   [2016]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: bcm: Add driver for Northstar ILP clock
From
Date
Hi Rafal,

On 7/29/2016 5:58 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This clock is present on cheaper Northstar devices like BCM53573 or
> BCM47189 using Corex-A7. This driver uses PMU (Power Management Unit)
> to calculate clock rate and allows using it in a generic (clk_*) way.
>

I thought Northstar uses Cortex A9 instead of A7?

> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> .../devicetree/bindings/clock/brcm,ns-ilp.txt | 28 ++++
> drivers/clk/bcm/Makefile | 1 +
> drivers/clk/bcm/clk-ns-ilp.c | 146 +++++++++++++++++++++
> 3 files changed, 175 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> create mode 100644 drivers/clk/bcm/clk-ns-ilp.c
>
> diff --git a/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> new file mode 100644
> index 0000000..c4df38e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> @@ -0,0 +1,28 @@
> +Broadcom Northstar ILP clock
> +============================
> +
> +This binding uses the common clock binding:
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +This binding is used for ILP clock on Broadcom Northstar devices using
> +Corex-A7 CPU. ILP clock depends on ALP one and has to be calculated on
> +runtime.
> +

Cortex-A9.

> +Required properties:
> +- compatible: "brcm,ns-ilp"
> +- reg: iomem address range of PMU (Power Management Unit)
> +- reg-names: "pmu", the only needed & supported reg right now
> +- clocks: should reference an ALP clock
> +- clock-names: "alp", the only needed & supported clock right now

clock-names must be "alp-clk"

> +- #clock-cells: should be <0>
> +
> +Example:
> +
> +ilp: ilp {
> + compatible = "brcm,ns-ilp";
> + reg = <0x18012000 0x1000>;
> + reg-names = "pmu";
> + clocks = <&alp>;
> + clock-names = "alp-clk";
> + #clock-cells = <0>;
> +};
> diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
> index 1d79bd2..1389379 100644
> --- a/drivers/clk/bcm/Makefile
> +++ b/drivers/clk/bcm/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
> obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
> obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
> obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
> +obj-$(CONFIG_ARCH_BCM_5301X) += clk-ns-ilp.o
> diff --git a/drivers/clk/bcm/clk-ns-ilp.c b/drivers/clk/bcm/clk-ns-ilp.c
> new file mode 100644
> index 0000000..230458e8
> --- /dev/null
> +++ b/drivers/clk/bcm/clk-ns-ilp.c
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +
> +#define PMU_XTAL_FREQ_RATIO 0x66c
> +#define XTAL_ALP_PER_4ILP 0x00001fff
> +#define XTAL_CTL_EN 0x80000000
> +#define PMU_SLOW_CLK_PERIOD 0x6dc
> +
> +struct ns_ilp {
> + struct clk *clk;
> + struct clk_hw hw;
> + struct clk *alp_clk;
> + void __iomem *pmu;
> +};
> +
> +static int ns_ilp_enable(struct clk_hw *hw)
> +{
> + struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw);
> +
> + writel(0x10199, ilp->pmu + PMU_SLOW_CLK_PERIOD);
> + writel(0x10000, ilp->pmu + 0x674);
> +
> + return 0;
> +}
> +
> +static unsigned long ns_ilp_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw);
> + void __iomem *pmu = ilp->pmu;
> + u32 last_val, cur_val;
> + u32 sum = 0, num = 0, loop_num = 0;
> + u32 avg;
> + int err;
> +
> + err = clk_prepare_enable(ilp->alp_clk);
> + if (err)
> + return 0;
> +
> + /* Enable */
> + writel(XTAL_CTL_EN, pmu + PMU_XTAL_FREQ_RATIO);
> +
> + /* Read initial value */
> + last_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP;
> +
> + /* Try getting 20 different values for calculating average */
> + while (num < 20) {
> + cur_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP;
> +
> + if (cur_val != last_val) {
> + /* Got different value, use it */
> + sum += cur_val;
> + num++;
> + loop_num = 0;
> + last_val = cur_val;
> + } else if (++loop_num > 5000) {
> + /* Same value over and over, give up */
> + sum += cur_val;
> + num++;
> + break;
> + }
> + }
> +
> + /* Disable */
> + writel(0x0, pmu + PMU_XTAL_FREQ_RATIO);
> +
> + avg = sum / num;
> +
> + return clk_get_rate(ilp->alp_clk) * 4 / avg;
> +}
> +
> +const struct clk_ops ns_ilp_clk_ops = {

static

> + .enable = ns_ilp_enable,
> + .recalc_rate = ns_ilp_recalc_rate,
> +};
> +
> +static void ns_ilp_init(struct device_node *np)
> +{
> + struct ns_ilp *ilp;
> + struct resource res;
> + struct clk_init_data init = { 0 };
> + int index;
> + int err;
> +
> + ilp = kzalloc(sizeof(*ilp), GFP_KERNEL);
> + if (!ilp)
> + return;
> +
> + index = of_property_match_string(np, "reg-names", "pmu");
> + if (index < 0) {
> + err = index;
> + goto err_free_ilp;
> + }
> + err = of_address_to_resource(np, index, &res);
> + if (err) {
> + err = index;
> + goto err_free_ilp;
> + }
> + ilp->pmu = ioremap_nocache(res.start, resource_size(&res));
> + if (IS_ERR(ilp->pmu)) {
> + err = PTR_ERR(ilp->pmu);
> + goto err_free_ilp;
> + }
> +
> + ilp->alp_clk = of_clk_get_by_name(np, "alp-clk");
> + if (IS_ERR(ilp->alp_clk)) {
> + err = PTR_ERR(ilp->alp_clk);
> + goto err_unmap_pmu;
> + }
> +
> + init.name = np->name;
> + init.ops = &ns_ilp_clk_ops;
> + init.flags = CLK_IS_ROOT;
> +
> + ilp->hw.init = &init;
> + ilp->clk = clk_register(NULL, &ilp->hw);
> + if (WARN_ON(IS_ERR(ilp->clk)))
> + goto err_put_alp_clk;
> +
> + of_clk_add_provider(np, of_clk_src_simple_get, ilp->clk);

Check return value and handle error conditions

> +
> + return;
> +
> +err_put_alp_clk:
> + clk_put(ilp->alp_clk);
> +err_unmap_pmu:
> + iounmap(ilp->pmu);
> +err_free_ilp:
> + kfree(ilp);
> + pr_err("Failed to init ILP clock: %d\n", err);
> +}
> +CLK_OF_DECLARE(ns_ilp_clk, "brcm,ns-ilp", ns_ilp_init);
>

Thanks,

Ray

\
 
 \ /
  Last update: 2016-07-29 23:21    [W:0.123 / U:5.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site