lkml.org 
[lkml]   [2016]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 18/18] ARM: mvebu: a395-gp: add support for the Armada 395 GP Board
Date
Hi Grzegorz,

On jeu., juil. 21 2016, Grzegorz Jaszczyk <jaz@semihalf.com> wrote:

Change the prefix to "ARM: dts: mvebu: armada-395-gp:"

> This commit adds description for the following features for this board:
>
> - Serial port
> - PCIe interfaces
> - USB2.0
> - USB3.0
> - SDIO
> - 1024 MiB NAND-FLASH
> - SATA
> - I2C buses
>
> Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[...]

As for the other board, try to add information about the connector used:

> + serial@12000 {
Here,

> + status = "okay";
> + };
> +
> + usb@58000 {
here
> + status = "okay";
> + };
> +
> + sata@a8000 {
here
> + status = "okay";
> + };
> +
> + flash@d0000 {
> + status = "okay";
> + pinctrl-0 = <&nand_pins>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "U-Boot";
> + reg = <0x00000000 0x00600000>;
> + read-only;
> + };
> +
> + partition@800000 {
> + label = "uImage";
> + reg = <0x00600000 0x00400000>;
> + read-only;
> + };
> +
> + partition@1000000 {
> + label = "Root";
> + reg = <0x00a00000 0x3f600000>;
> + };
> + };
> + };
> +
> + sdhci@d8000 {
here
> + clock-frequency = <200000000>;
> + broken-cd;
> + wp-inverted;
> + bus-width = <8>;
> + status = "okay";
> + no-1-8-v;
> + };
> +
> + usb3@f0000 {
here
> + status = "okay";
> + };
> + };
> +
> + pcie-controller {
> + status = "okay";
> +
> + /*
> + * The two PCIe units are accessible through
> + * mini PCIe slot on the board.
> + */
and here for each slot
> + pcie@2,0 {
> + /* Port 1, Lane 0 */
> + status = "okay";
> + };
> +
> + pcie@4,0 {
> + /* Port 3, Lane 0 */
> + status = "okay";
> + };
> + };
> + };
> +};

then you can add my:
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Thanks,

Gregory

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2016-07-28 16:01    [W:0.344 / U:1.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site