lkml.org 
[lkml]   [2016]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] 8139too:fix system hang when there is a tx timeout event.
Date
If tx timeout event occur, kernel will call rtl8139_tx_timeout_task() to reset
hardware. But in this function, driver does not stop tx and rx function before
reset hardware, that will cause system hang.

In this patch, add stop tx and rx function before reset hardware.

Signed-off-by: Chunhao Lin <hau@realtek.com>
---
drivers/net/ethernet/realtek/8139too.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index ef668d3..0d77f3c 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1667,6 +1667,10 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
int i;
u8 tmp8;

+ napi_disable(&tp->napi);
+ netif_stop_queue(dev);
+ synchronize_sched();
+
netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
RTL_R8(ChipCmd), RTL_R16(IntrStatus),
RTL_R16(IntrMask), RTL_R8(MediaStatus));
@@ -1696,10 +1700,10 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
spin_unlock_irq(&tp->lock);

/* ...and finally, reset everything */
- if (netif_running(dev)) {
- rtl8139_hw_start (dev);
- netif_wake_queue (dev);
- }
+ napi_enable(&tp->napi);
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+
spin_unlock_bh(&tp->rx_lock);
}

--
1.9.1
\
 
 \ /
  Last update: 2016-07-27 21:21    [W:0.043 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site