lkml.org 
[lkml]   [2016]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.6 058/203] regulator: qcom_smd: add list_voltage callback
    Date
    4.6-stable review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

    commit a8a47540ebe32f1733eebc3e5699af580ceaa3f5 upstream.

    This patch adds support to list_voltage callback, so that consumers
    like mmc core, can get information of supported voltage range.

    Without this patch there is no way for mmc core to know this voltage range.

    Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    Signed-off-by: Mark Brown <broonie@kernel.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    drivers/regulator/qcom_smd-regulator.c | 1 +
    1 file changed, 1 insertion(+)

    --- a/drivers/regulator/qcom_smd-regulator.c
    +++ b/drivers/regulator/qcom_smd-regulator.c
    @@ -140,6 +140,7 @@ static const struct regulator_ops rpm_sm
    .enable = rpm_reg_enable,
    .disable = rpm_reg_disable,
    .is_enabled = rpm_reg_is_enabled,
    + .list_voltage = regulator_list_voltage_linear_range,

    .get_voltage = rpm_reg_get_voltage,
    .set_voltage = rpm_reg_set_voltage,

    \
     
     \ /
      Last update: 2016-07-26 00:21    [W:4.023 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site