lkml.org 
[lkml]   [2016]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add AXP209 GPIO driver
Date
Hi,

The axp209 PMIC used in combination to some Allwinner SoCs has a bunch
of GPIOs accessible. Some boards use these to control their backlight
or a few LEDs.

There's supposed to be 4 of them, but the fourth one has a different
configuration register scheme, and I couldn't find any board that was
using this GPIO. It will be probably be supported eventually, but
until then, we support only the first 3 GPIOs.

Let me know what you think,
Maxime

Changes from v1:
- Use gpiochip_add_data and gpiochip_get_data
- Drop unneeded headers
- Make sure gpio_get returns 0 or 1
- Made sure it compiles
- Rebased on linux-next

Maxime Ripard (4):
gpio: Add AXP209 GPIO driver
mfd: axp20x: Add AXP209 GPIO driver to the mfd
ARM: dt: axp209: Add AXP209 GPIO driver
ARM: sun5i: chip: Add status LED

.../devicetree/bindings/gpio/gpio-axp209.txt | 30 ++++
arch/arm/boot/dts/axp209.dtsi | 6 +
arch/arm/boot/dts/sun5i-r8-chip.dts | 10 ++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-axp209.c | 162 +++++++++++++++++++++
drivers/mfd/axp20x.c | 3 +
7 files changed, 218 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 drivers/gpio/gpio-axp209.c

--
2.9.0

\
 
 \ /
  Last update: 2016-07-20 17:01    [W:0.121 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site