lkml.org 
[lkml]   [2016]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/6] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property
Date
The current dts describes USB HUB's property at USB controller's
entry, it is improper. The USB HUB should be the child node
under USB controller, and power sequence properties are under
it.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 3bee2f9..f29a72c2f 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -9,6 +9,8 @@
*
*/

+#include <dt-bindings/gpio/gpio.h>
+
/ {
aliases {
backlight = &backlight;
@@ -58,17 +60,6 @@
#address-cells = <1>;
#size-cells = <0>;

- reg_usb_h1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
- gpio = <&gpio7 12 0>;
- };
-
reg_panel: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
@@ -259,9 +250,18 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
- vbus-supply = <&reg_usb_h1_vbus>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb2415: hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ reset-duration-us = <3000>;
+ };
};

&usdhc3 {
--
1.9.1
\
 
 \ /
  Last update: 2016-07-20 12:41    [W:1.057 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site