lkml.org 
[lkml]   [2016]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH RFC 6/7] clk: imx: pllv3: convert to prepare_hw and set_rate_hw
Hi Dong,

On Wed, Jun 29, 2016 at 10:52 AM, Dong Aisheng <aisheng.dong@nxp.com> wrote:

Thanks for working on this series.

Tested the whole series on a mx7d-sdb and it does fix the several clk
warnings that we currently have.

> +static int clk_pllv3_set_rate_done(struct clk_hw *hw)
> +{
> + struct clk_pllv3 *pll = to_clk_pllv3(hw);
> + u32 val = readl_relaxed(pll->base) & pll->powerdown;

I had to change this to:

--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -108,7 +108,7 @@ static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned
static int clk_pllv3_set_rate_done(struct clk_hw *hw)
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val = readl_relaxed(pll->base) & pll->powerdown;
+ u32 val = readl_relaxed(pll->base) & pll->power_bit;

,so that it can build against linux-next.

\
 
 \ /
  Last update: 2016-07-02 23:01    [W:0.184 / U:12.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site