lkml.org 
[lkml]   [2016]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] dt/bindings: Add bindings for JC-42.4 compatible temperature sensors
Date
Provide generic bindings for all Jedec JC-42.4 compatible temperature
sensor chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
RFC to address:
- Is "jc-42-4" ok to use for JC-42.4 ?
- JC42.4 really specifies an SPD EEPROM with included temperature sensor.
Is "jedec,jc42-4" appropriate, or should it rather be something like
"jedec,jc-42-4-sensor" ?

Documentation/devicetree/bindings/hwmon/jc42.txt | 42 ++++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/jc42.txt

diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt
new file mode 100644
index 000000000000..2bd604a93430
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/jc42.txt
@@ -0,0 +1,42 @@
+Properties for Jedec JC-42.4 compatible temperature sensors
+
+Required properties:
+- compatible: May include a device-specific string consisting of the
+ manufacturer and the name of the chip. A list of supported
+ chip names follows.
+ Must include "jedec,jc-42-4" for any Jedec JC-42.4 compatible
+ temperature sensor.
+
+ Supported chip names:
+ adt7408
+ at30ts00
+ at30tse004
+ cat6095
+ cat34ts02
+ max6604
+ mcp9804
+ mcp9805
+ mcp9808
+ mcp98243
+ mcp98244
+ mcp9843
+ se97
+ se98
+ stts2002
+ stts2004
+ stts3000
+ stts424
+ stts424e
+ tse2002
+ tse2004
+ ts3000
+ ts3001
+
+- reg: I2C address
+
+Example:
+
+temp-sensor@1a {
+ compatible = "jedec,jc-42-4";
+ reg = <0x18>;
+};
--
2.5.0
\
 
 \ /
  Last update: 2016-07-02 19:41    [W:0.087 / U:10.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site