lkml.org 
[lkml]   [2016]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/6] dt-bindings: clock: add DT binding for the peripheral clocks on Armada 3700
Date
This commit adds the DT binding documentation for the peripheral clocks
used in the Marvell Armada 3700 SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/clock/armada3700-periph-clock.txt | 70 ++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
new file mode 100644
index 000000000000..1e3370ba189f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
@@ -0,0 +1,70 @@
+* Peripheral Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide peripheral clocks which are
+used as clock source for the peripheral of the SoC.
+
+There are two different blocks associated to north bridge and south
+bridge.
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs for Armada 370 North bridge clocks:
+ID Clock name Description
+-----------------------------------
+0 mmc MMC controller
+1 sata_host Sata Host
+2 sec_at Security AT
+3 sac_dap Security DAP
+4 tsecm Security Engine
+5 setm_tmx Serial Embedded Trace Module
+6 avs Adaptive Voltage Scaling
+7 sqf SPI
+8 pwm PWM
+9 i2c_2 I2C 2
+10 i2c_1 I2C 1
+11 ddr_phy DDR PHY
+12 ddr_fclk DDR F clock
+13 trace Trace
+14 counter Counter
+15 eip97 EIP 97
+16 cpu CPU
+
+The following is a list of provided IDs for Armada 370 South bridge clocks:
+ID Clock name Description
+-----------------------------------
+0 gbe-50 50 MHz parent clock for Gigabit Ethernet
+1 gbe-core parent clock for Gigabit Ethernet core
+2 gbe-125 125 MHz parent clock for Gigabit Ethernet
+3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1
+4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0
+5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1
+6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0
+7 gbe1-core Gigabit Ethernet core port 1
+8 gbe0-core Gigabit Ethernet core port 0
+9 gbe-bm Gigabit Ethernet Buffer Manager
+10 sdio SDIO
+11 usb32-sub2-sys USB 2 clock
+12 usb32-ss-sys USB 3 clock
+
+Required properties:
+
+- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
+ north bridge block, or
+ "marvell,armada-3700-periph-clock-sb" for the south bridge block
+- reg : must be the register address of North/South Bridge Clock register
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks : list of the parent clock phandle in the following order:
+ TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
+
+
+Example:
+
+nb_perih_clk: nb-periph-clk@13000{
+ compatible = "marvell,armada-3700-periph-clock-nb";
+ reg = <0x13000 0x1000>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+ <&tbg 3>, <&xtalclk>;
+ #clock-cells = <1>;
+};
--
2.5.0
\
 
 \ /
  Last update: 2016-07-19 16:21    [W:0.221 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site