lkml.org 
[lkml]   [2016]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v8 0/3] Add a new Rockchip usb2 phy driver
Date
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding
dt-bindings.

Changes in v8:
- Added support for rk3399 SoC.
- Prepare input clock of phy at probe time.
- Improved sm_work function to handle phy-port state more clearly.

Changes in v7:
- Renamed functions *usb2phy_resume/*usb2phy_suspend to *usb2phy_power_on/usb2phy_power_off.

Changes in v6:
- Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings.
- Fixed the output clock would be disabled more than once while phy-port was going to suspend.
- Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences.

Changes in v5:
- Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.

Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
- Supplemented some hardware-description into the devicetree bindings.
- Resolved the mapping defect between fixed value in driver and the property
in devicetree.
- Code cleanup.

Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.

Frank Wang (3):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
arm64: dts: rockchip: add usb2-phy support for rk3399

.../bindings/phy/phy-rockchip-inno-usb2.txt | 64 ++
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 19 +
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 47 +-
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 707 ++++++++++++++++++++
6 files changed, 844 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

--
1.7.9.5


\
 
 \ /
  Last update: 2016-07-19 10:01    [W:0.035 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site