lkml.org 
[lkml]   [2016]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
Hi Neil,

> Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
> It differs from the meson6/meson8b HW, so need for a separate driver.
> The HW provides a divider capable of having a 1ms timebase thus simplifying
> the counter update.
> The restart call is not provided even if the HW is capable of triggering a
> system reset immediately because of the PSCI firmare having such functionnality.
> The watchdog is not expected to be running at boot time since there is a separate
> system-level watchdog running from the SCPI co-processor, but this case would be
> handle in a next driver update.
>
> Changes since v2 at http://lkml.kernel.org/r/1464943007-18000-1-git-send-email-narmstrong@baylibre.com :
> - Fix set_timeout behaviour
>
> Changes since v1 at http://lkml.kernel.org/r/1464614948-28247-1-git-send-email-narmstrong@baylibre.com :
> - Update default timeout to 30sec
> - Add separate CONFIG_
> - Remove unused defines & functions
> - Fix indentation
> - Check set_timeout max value
> - Reorder includes alphabetically
> - Switch to human identify string
> - clk_disable_unprepare on probe failure or removal
>
> Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@baylibre.com :
> - Remove status callback, will re-introduce it later to managed the already-running use case
> - Fix registers defines indentation
> - Fix space between operators
> - Make all callbacks static functions
> - Fix bindings with missing clocks attribute
> - Do not stop/start watchdog on a timeout setup
> - Fix probe device configuration
>
> Neil Armstrong (3):
> watchdog: Add Meson GXBB Watchdog Driver
> dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
> ARM64: dts: amlogic: meson-gxbb: Add watchdog node
>
> .../bindings/watchdog/meson-gxbb-wdt.txt | 16 ++
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 +
> drivers/watchdog/Kconfig | 10 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/meson_gxbb_wdt.c | 270 +++++++++++++++++++++
> 5 files changed, 303 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
> create mode 100644 drivers/watchdog/meson_gxbb_wdt.c
>
> --
> 2.7.0
>

This patches have been added to linux-watchdog-next.

Kind regards,
Wim.

\
 
 \ /
  Last update: 2016-07-17 23:01    [W:0.092 / U:1.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site