lkml.org 
[lkml]   [2016]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v0 08/10] net: phy: Try looking for a phy-handle property to find the OF node
Date
If PHY is registered via. a DSA switch, the MDIO bus the phy is on does
not exist in devicetree, but there may be a reference to the PHY node
on the physical MDIO bus to use.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
---
drivers/net/phy/marvell.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 280e879..c2ca347 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -302,14 +302,24 @@ static int marvell_config_aneg(struct phy_device *phydev)
*/
static int marvell_of_reg_init(struct phy_device *phydev)
{
- const __be32 *paddr;
+ const __be32 *paddr = NULL;
int len, i, saved_page, current_page, page_changed, ret;
+ struct device_node *phy_dn;
+
+ if (phydev->mdio.dev.of_node)
+ paddr = of_get_property(phydev->mdio.dev.of_node,
+ "marvell,reg-init", &len);
+ else if (phydev->attached_dev->dev.of_node) {
+ /* A DSA slave-mii-bus has no OF node, but the PHY might */
+ phy_dn = of_parse_phandle(phydev->attached_dev->dev.of_node,
+ "phy-handle", 0);
+ if (phy_dn) {
+ paddr = of_get_property(phy_dn,
+ "marvell,reg-init", &len);
+ of_node_put(phy_dn);
+ }
+ }

- if (!phydev->mdio.dev.of_node)
- return 0;
-
- paddr = of_get_property(phydev->mdio.dev.of_node,
- "marvell,reg-init", &len);
if (!paddr || len < (4 * sizeof(*paddr)))
return 0;

--
2.8.1
\
 
 \ /
  Last update: 2016-07-16 17:41    [W:0.123 / U:3.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site