lkml.org 
[lkml]   [2016]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v18 4/6] fpga: add fpga bridge framework
On Thu, Jul 14, 2016 at 3:54 PM, Paul Gortmaker
<paul.gortmaker@windriver.com> wrote:
> On Tue, Jul 12, 2016 at 3:36 PM, Alan Tull <atull@opensource.altera.com> wrote:
>> This framework adds API functions for enabling/
>> disabling FPGA bridges under kernel control.
>>
>> This allows the Linux kernel to disable FPGA bridges
>> during FPGA reprogramming and to enable FPGA bridges
>> when FPGA reprogramming is done. This framework is
>> be manufacturer-agnostic, allowing it to be used in
>> interfaces that use the FPGA Manager Framework to
>> reprogram FPGA's.
>>
>> The functions are:
>> * of_fpga_bridge_get
>> * fpga_bridge_put
>> Get/put an exclusive reference to a FPGA bridge.
>>
>> * fpga_bridge_enable
>> * fpga_bridge_disable
>> Enable/Disable traffic through a bridge.
>>
>> * fpga_bridge_register
>> * fpga_bridge_unregister
>> Register/unregister a device-specific low level FPGA
>> Bridge driver.
>>
>> Get an exclusive reference to a bridge and add it to a list:
>> * fpga_bridge_get_to_list
>>
>> To enable/disable/put a set of bridges that are on a list:
>> * fpga_bridges_enable
>> * fpga_bridges_disable
>> * fpga_bridges_put
>>
>> Signed-off-by: Alan Tull <atull@opensource.altera.com>
>> ---
>> v2: Minor cleanup
>> v12: Bump version to line up with simple fpga bus
>> Remove sysfs
>> Improve get/put functions, get the low level driver too.
>> Clean up class implementation
>> Add kernel doc documentation
>> Rename (un)register_fpga_bridge -> fpga_bridge_(un)register
>> v13: Add inlined empty functions for if not CONFIG_FPGA_BRIDGE
>> Clean up debugging
>> Remove unneeded #include in .h
>> Remove unnecessary prints
>> Remove 'label' DT binding.
>> Document the mutex
>> v14: Allow bridges with no ops
>> *const* struct fpga_bridge_ops
>> Add functions to git/put/enable/disable list of bridges
>> Add list node to struct fpga_bridge
>> Do of_node_get/put in of_fpga_bridge_get()
>> Add r/o attributes: name and state
>> v15: No change in this patch for v15 of this patch set
>> v16: Remove of_get_fpga_bus function
>> v17: No change to this patch in v17 of patch set
>> v18: No change to this patch in v18 of patch set
>> ---
>> drivers/fpga/Kconfig | 7 +
>> drivers/fpga/Makefile | 3 +
>> drivers/fpga/fpga-bridge.c | 388 +++++++++++++++++++++++++++++++++++++++
>> include/linux/fpga/fpga-bridge.h | 55 ++++++
>> 4 files changed, 453 insertions(+)
>> create mode 100644 drivers/fpga/fpga-bridge.c
>> create mode 100644 include/linux/fpga/fpga-bridge.h
>>
>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
>> index d614102..46e20af 100644
>> --- a/drivers/fpga/Kconfig
>> +++ b/drivers/fpga/Kconfig
>> @@ -25,6 +25,13 @@ config FPGA_MGR_ZYNQ_FPGA
>> help
>> FPGA manager driver support for Xilinx Zynq FPGAs.
>>
>> +config FPGA_BRIDGE
>> + bool "FPGA Bridge Framework"
>
> Same here. A bool Kconfig but module.h etc. used in the driver.
>
> Either make the code modular with a tristate if there is a valid
> use case for that, or get rid of the modular references.

Yes, of course. Thanks!

Alan Tull

>
> Thanks,
> Paul.
> --

\
 
 \ /
  Last update: 2016-07-15 19:41    [W:0.067 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site