lkml.org 
[lkml]   [2016]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Purpose of pci_remap_iospace
Date
> On Thu, Jul 14, 2016 at 01:32:13PM +0000, Bharat Kumar Gogada wrote:
>
> [...]
>
> > Hi Lorenzo,
> >
> > I missed something in my device tree now I corrected it.
> >
> > ranges = <0x01000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0
> 0x00010000 //io
>
> You have not missed anything, you changed the PCI bus address at which
> your host bridge responds to IO space and it must match your configuration.
> At what PCI bus address your host bridge maps IO space ?
>
> > 0x02000000 0x00000000 0xe0100000 0x00000000
> > 0xe0100000 0 0x0ef00000>; //non prefetchabe memory
> >
> > [ 2.389498] nwl-pcie fd0e0000.pcie: Link is UP
> > [ 2.389541] PCI host bridge /amba/pcie@fd0e0000 ranges:
> > [ 2.389558] No bus range found for /amba/pcie@fd0e0000, using [bus
> 00-ff]
> > [ 2.389583] IO 0xe0000000..0xe000ffff -> 0xe0000000
> > [ 2.389624] MEM 0xe0100000..0xeeffffff -> 0xe0100000
> > [ 2.389803] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
> > [ 2.389822] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [ 2.389839] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus
> address [0xe0000000-0xe000ffff])
> > [ 2.389863] pci_bus 0000:00: root bus resource [mem 0xe0100000-
> 0xeeffffff]
> > [ 2.390094] pci 0000:00:00.0: cannot attach to SMMU, is it on the same
> bus?
> > [ 2.390110] iommu: Adding device 0000:00:00.0 to group 1
> > [ 2.390274] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
> > [ 2.390481] pci 0000:01:00.0: cannot attach to SMMU, is it on the same
> bus?
> > [ 2.390496] iommu: Adding device 0000:01:00.0 to group 1
> > [ 2.390533] in pci_bridge_check_ranges io 101
> > [ 2.390545] in pci_bridge_check_ranges io 2 101
> > [ 2.390575] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0100000-
> 0xe02fffff]
> > [ 2.390592] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
> > [ 2.390609] pci 0000:00:00.0: BAR 6: assigned [mem 0xe0300000-
> 0xe03007ff pref]
> > [ 2.390636] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0100000-0xe01fffff
> 64bit]
> > [ 2.390669] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff
> 64bit]
> > [ 2.390702] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x103f]
> > [ 2.390721] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
> > [ 2.390785] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
> > [ 2.390823] pci 0000:00:00.0: bridge window [mem 0xe0100000-
> 0xe02fffff]
> >
Thanks a lot Loenzo for your kind and clear explanation, I will dig through hardware and correct my device tree.

From above log why IO space is allocated as only 4k even though I'm allocating 64k through device tree ?

Regards,
Bharat



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

\
 
 \ /
  Last update: 2016-07-14 17:41    [W:0.096 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site