lkml.org 
[lkml]   [2016]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
On Thu, Jul 14, 2016 at 01:53:20AM +0800, fu.wei@linaro.org wrote:
> From: Fu Wei <fu.wei@linaro.org>
>
> This driver adds support for parsing memory-mapped timer in GTDT:
> provide a kernel APIs to parse GT Block Structure in GTDT,
> export all the info by filling the struct which provided
> by parameter(pointer of the struct).
>
> By this driver, we can add ACPI support for memory-mapped timer in
> arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.
>
> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
> drivers/acpi/arm64/acpi_gtdt.c | 90 ++++++++++++++++++++++++++++++++++++
> include/clocksource/arm_arch_timer.h | 15 ++++++
> include/linux/acpi.h | 1 +
> 3 files changed, 106 insertions(+)
>
> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
> index 9ee977d..ff62953 100644
> --- a/drivers/acpi/arm64/acpi_gtdt.c
> +++ b/drivers/acpi/arm64/acpi_gtdt.c
> @@ -168,3 +168,93 @@ int __init gtdt_arch_timer_init(struct acpi_table_header *table)
>
> return -EINVAL;
> }
> +
> +/*
> + * Helper function for getting the pointer of a timer frame in GT block.
> + */
> +static void __init *gtdt_gt_timer_frame(struct acpi_gtdt_timer_block *gt_block,
> + int index)
> +{
> + void *timer_frame = (void *)gt_block + gt_block->timer_offset +
> + sizeof(struct acpi_gtdt_timer_entry) * index;
> +
> + if (timer_frame <= (void *)gt_block + gt_block->header.length -
> + sizeof(struct acpi_gtdt_timer_entry))
> + return timer_frame;

Nit: gt_block is an array, right ? I think it would be much simpler
if you treat is as such, so that indexing into it would be done
automatically by the compiler. Actually, I do not even think you
would need this function at all if you treat gt_block as an array,
the length check could be done in gtdt_parse_gt_block() straight
away.

> +
> + return NULL;
> +}
> +
> +static int __init gtdt_parse_gt_block(void *platform_timer, int index,
> + void *data)
> +{
> + struct acpi_gtdt_timer_block *block;
> + struct acpi_gtdt_timer_entry *frame;
> + struct gt_block_data *block_data;
> + int i, j;
> +
> + if (!platform_timer || !data)
> + return -EINVAL;
> +
> + block = platform_timer;
> + block_data = data + sizeof(struct gt_block_data) * index;

Nit: See above, data is a struct gt_block_data[] right ? These void
pointers parameters are not really great, the caller context
knows what they are and it can pass them as pointer to typed
array elements anyway unless I am missing something.

> + if (!block->block_address || !block->timer_count) {
> + pr_err(FW_BUG "invalid GT Block data.\n");
> + return -EINVAL;
> + }
> + block_data->cntctlbase_phy = (phys_addr_t)block->block_address;
> + block_data->timer_count = block->timer_count;
> +
> + /*
> + * Get the GT timer Frame data for every GT Block Timer
> + */
> + for (i = 0, j = 0; i < block->timer_count; i++) {

What's j needed for (ie can't you use just i instead ?) ?

> + frame = gtdt_gt_timer_frame(block, i);
> + if (!frame || !frame->base_address || !frame->timer_interrupt) {
> + pr_err(FW_BUG "invalid GT Block Timer data.\n");
> + return -EINVAL;
> + }
> + block_data->timer[j].frame_nr = frame->frame_number;
> + block_data->timer[j].cntbase_phy = frame->base_address;
> + block_data->timer[j].irq = map_generic_timer_interrupt(
> + frame->timer_interrupt,
> + frame->timer_flags);
> + if (frame->virtual_timer_interrupt)
> + block_data->timer[j].virt_irq =
> + map_generic_timer_interrupt(
> + frame->virtual_timer_interrupt,
> + frame->virtual_timer_flags);
> + j++;
> + }
> +
> + if (j)
> + return 0;
> +
> + block_data->cntctlbase_phy = (phys_addr_t)NULL;

This is wrong. NULL is not meant to be used as a physical address,
you must not do that. Is not zeroeing timer_count enough ? I have
to understand why you need this because casting NULL into it is
not safe, at all.

> + block_data->timer_count = 0;
> +
> + return -EINVAL;
> +}
> +
> +/*
> + * Get the GT block info for memory-mapped timer from GTDT table.
> + * Please make sure we have called gtdt_arch_timer_init, because it helps to
> + * init the global variables.

It is a helper function that you call once at boot, you easily
determine when it is called, it is not meant to be used in different
contexts from different subsystems; I think that this comment
is not clear so either you make it clearer or you remove it.

> + */
> +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
> +{
> + void *platform_timer;
> + int index = 0;
> +
> + for_each_platform_timer(platform_timer) {
> + if (is_timer_block(platform_timer) &&
> + !gtdt_parse_gt_block(platform_timer, index, data))

Passing around these opaque void* is a tad ugly, see my comments
above about this.

Apart from the NULL pointer assignment, everything else is just code
clean-up.

Thanks,
Lorenzo

> + index++;
> + }
> +
> + if (index)
> + pr_info("found %d memory-mapped timer block.\n", index);
> +
> + return index;
> +}
> diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
> index 16dcd10..ece6b3b 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -56,6 +56,8 @@ enum spi_nr {
> #define ARCH_TIMER_MEM_PHYS_ACCESS 2
> #define ARCH_TIMER_MEM_VIRT_ACCESS 3
>
> +#define ARCH_TIMER_MEM_MAX_FRAME 8
> +
> #define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */
> #define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */
> #define ARCH_TIMER_VIRT_EVT_EN (1 << 2)
> @@ -71,6 +73,19 @@ struct arch_timer_kvm_info {
> int virtual_irq;
> };
>
> +struct gt_timer_data {
> + int frame_nr;
> + phys_addr_t cntbase_phy;
> + int irq;
> + int virt_irq;
> +};
> +
> +struct gt_block_data {
> + phys_addr_t cntctlbase_phy;
> + int timer_count;
> + struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME];
> +};
> +
> #ifdef CONFIG_ARM_ARCH_TIMER
>
> extern u32 arch_timer_get_rate(void);
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 8439579..b1cacbc 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -536,6 +536,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
> int __init gtdt_arch_timer_init(struct acpi_table_header *table);
> int __init acpi_gtdt_map_ppi(int type);
> int __init acpi_gtdt_c3stop(void);
> +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data);
> #endif
>
> #else /* !CONFIG_ACPI */
> --
> 2.5.5
>

\
 
 \ /
  Last update: 2016-07-14 16:21    [W:0.117 / U:9.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site