lkml.org 
[lkml]   [2016]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/8] Input: synaptics-rmi4: Add support for controlling dribble packets in F12
Date
Implements reading and setting the dribble bit in F12's control registers.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
This is the same as V1.

drivers/input/rmi4/rmi_f12.c | 74 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
index 8dd3fb5..041a91d 100644
--- a/drivers/input/rmi4/rmi_f12.c
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -30,6 +30,7 @@ struct f12_data {
struct rmi_function *fn;
struct rmi_2d_sensor sensor;
struct rmi_2d_sensor_platform_data sensor_pdata;
+ bool has_dribble;

u16 data_addr;

@@ -228,12 +229,79 @@ static int rmi_f12_attention(struct rmi_function *fn,
return 0;
}

+static int rmi_f12_write_control_regs(struct rmi_function *fn)
+{
+ int ret;
+ const struct rmi_register_desc_item *item;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+ int control_size;
+ char buf[3];
+ u16 control_offset = 0;
+ u8 subpacket_offset = 0;
+
+ if (f12->has_dribble
+ && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
+ item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
+ if (item) {
+ control_offset = rmi_register_desc_calc_reg_offset(
+ &f12->control_reg_desc, 20);
+
+ /*
+ * The byte containing the EnableDribble bit will be
+ * in either byte 0 or byte 2 of control 20. Depending
+ * on the existence of subpacket 0. If control 20 is
+ * larger then 3 bytes, just read the first 3.
+ */
+ if (item->reg_size >= 3)
+ control_size = 3;
+ else
+ control_size = item->reg_size;
+
+ ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
+ + control_offset, buf, control_size);
+ if (ret)
+ return ret;
+
+ if (rmi_register_desc_has_subpacket(item, 0))
+ subpacket_offset += 1;
+
+ switch (f12->sensor.dribble) {
+ case RMI_REG_STATE_OFF:
+ buf[subpacket_offset] &= ~BIT(2);
+ break;
+ case RMI_REG_STATE_ON:
+ buf[subpacket_offset] |= BIT(2);
+ break;
+ case RMI_REG_STATE_DEFAULT:
+ default:
+ break;
+ }
+
+ ret = rmi_write_block(rmi_dev,
+ fn->fd.control_base_addr + control_offset,
+ buf, control_size);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+
+}
+
static int rmi_f12_config(struct rmi_function *fn)
{
struct rmi_driver *drv = fn->rmi_dev->driver;
+ int ret;

drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);

+ ret = rmi_f12_write_control_regs(fn);
+ if (ret)
+ dev_warn(&fn->dev,
+ "Failed to write F12 control registers: %d\n", ret);
+
return 0;
}

@@ -260,16 +328,19 @@ static int rmi_f12_probe(struct rmi_function *fn)
}
++query_addr;

- if (!(buf & 0x1)) {
+ if (!(buf & BIT(0))) {
dev_err(&fn->dev,
"Behavior of F12 without register descriptors is undefined.\n");
return -ENODEV;
}

+
f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data), GFP_KERNEL);
if (!f12)
return -ENOMEM;

+ f12->has_dribble = !!(buf & BIT(3));
+
if (fn->dev.of_node) {
ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
if (ret)
@@ -318,6 +389,7 @@ static int rmi_f12_probe(struct rmi_function *fn)

sensor->x_mm = f12->sensor_pdata.x_mm;
sensor->y_mm = f12->sensor_pdata.y_mm;
+ sensor->dribble = f12->sensor_pdata.dribble;

if (sensor->sensor_type == rmi_sensor_default)
sensor->sensor_type =
--
2.5.0
\
 
 \ /
  Last update: 2016-07-14 08:41    [W:0.027 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site