lkml.org 
[lkml]   [2016]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 02/16] gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset()
From
Date
Hi Philipp,

On 07/08/2016 10:34 AM, Philipp Zabel wrote:
> Am Donnerstag, den 07.07.2016, 16:03 -0700 schrieb Steve Longerbeam:
>> Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets.
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
>> ---
>> drivers/gpu/ipu-v3/ipu-cpmem.c | 7 +++++++
>> include/video/imx-ipu-v3.h | 1 +
>> 2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
>> index 6494a4d..a36c35e 100644
>> --- a/drivers/gpu/ipu-v3/ipu-cpmem.c
>> +++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
>> @@ -253,6 +253,13 @@ void ipu_cpmem_set_buffer(struct ipuv3_channel *ch, int bufnum, dma_addr_t buf)
>> }
>> EXPORT_SYMBOL_GPL(ipu_cpmem_set_buffer);
>>
>> +void ipu_cpmem_set_uv_offset(struct ipuv3_channel *ch, u32 u_off, u32 v_off)
>> +{
>> + ipu_ch_param_write_field(ch, IPU_FIELD_UBO, u_off / 8);
>> + ipu_ch_param_write_field(ch, IPU_FIELD_VBO, v_off / 8);
>> +}
>> +EXPORT_SYMBOL_GPL(ipu_cpmem_set_uv_offset);
>> +
> I'd prefer to avoid too much duplication in the API. Is there a reason
> you can't use ipu_cpmem_set_yuv_planar_full?

I could, but it would be cumbersome. ipu_cpmem_set_uv_offset() is being
called when kicking off a new tile conversion, and the stride length would
have to be calculated all over again if I were to use ipu_cpmem_set_yuv_planar_ful().
When kicking off a new tile conversion, the stride doesn't change, only the
tile's buffer address, and U/V offsets for planar, need to be updated.

Steve


\
 
 \ /
  Last update: 2016-07-14 01:41    [W:0.092 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site