lkml.org 
[lkml]   [2016]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] acpi spi: Initialize modalias from of_compatible
Date
When using devicetree spi_device.modalias is set to the compatible
string with the vendor prefix removed. For SPI devices described via
ACPI the i2c_board_info.type string is initialized by acpi_device_hid.
When using ACPI and DT ids this string ends up something like "PRP0001".

Change acpi_register_spi_device to use the of_compatible property if
present. This makes it easier to instantiate spi drivers through ACPI
with DT ids.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
---
drivers/spi/spi.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7589c8a..49fdf6e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1679,13 +1679,22 @@ static acpi_status acpi_register_spi_device(struct spi_master *master,
return AE_OK;
}

+ if (adev->data.of_compatible) {
+ ret = acpi_of_modalias(adev, spi->modalias, sizeof(spi->modalias));
+ if (ret) {
+ spi_dev_put(spi);
+ return AE_NOT_FOUND;
+ }
+ } else {
+ strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
+ }
+
if (spi->irq < 0)
spi->irq = acpi_dev_gpio_irq_get(adev, 0);

acpi_device_set_enumerated(adev);

adev->power.flags.ignore_parent = true;
- strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
if (spi_add_device(spi)) {
adev->power.flags.ignore_parent = false;
dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
--
2.7.4
\
 
 \ /
  Last update: 2016-07-13 14:41    [W:0.384 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site