lkml.org 
[lkml]   [2016]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ata: hpt366: fix incorrect mask when checking at cmd_high_time
Date

Hi,

On Tuesday, July 12, 2016 12:16:19 PM Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> According to the HPT366 data sheet, PCI config space dword 0x40-0x43
> bits 11:8 specify the primary drive cmd_high_time, however,
> currently just 3 bits of the 4 are being used because the mask
> is 0x700 and not 0x0f00. Fix the mask, allowing for the 40MHz clock
> to be detected.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Thanks for the patch, could you also fix also the old driver
(drivers/ide/hpt366.c)?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
> drivers/ata/pata_hpt366.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
> index e5fb752..a219a50 100644
> --- a/drivers/ata/pata_hpt366.c
> +++ b/drivers/ata/pata_hpt366.c
> @@ -368,7 +368,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
>
> /* PCI clocking determines the ATA timing values to use */
> /* info_hpt366 is safe against re-entry so we can scribble on it */
> - switch ((reg1 & 0x700) >> 8) {
> + switch ((reg1 & 0xf00) >> 8) {
> case 9:
> hpriv = &hpt366_40;
> break;

\
 
 \ /
  Last update: 2016-07-12 14:21    [W:0.051 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site