lkml.org 
[lkml]   [2016]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 06/10] soc: Add SoC specific driver support for nuc900
Date
On Sunday, July 10, 2016 3:27:26 PM CEST Wan Zongshun wrote:
> + ret = of_property_read_string(np, "compatible", &soc_dev_attr->soc_id);
> + if (ret)
> return -EINVAL;
> +
> + soc_dev_attr->machine = "NUC900EVB";
> + soc_dev_attr->family = "NUC900";
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + kfree(soc_dev_attr);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(syscon_regmap, GCR_CHIPID, &nuc900_chipid);
> + if (ret)
> + return -ENODEV;
> +
> + device_create_file(soc_device_to_device(soc_dev), &nuc900_chipid_attr);
> + device_create_file(soc_device_to_device(soc_dev), &nuc900_version_attr);
> +
> + dev_info(&pdev->dev, "Nuvoton Chip ID: 0x%x, Version ID:0x%x\n",
> + nuc900_chipid & GCR_CHIPID_MASK,
> + (nuc900_chipid >> 24) & 0xff);

I'm still a bit unsure about the set of attributes here.

- The "soc_id" is read from the device tree from the field that contains
the board name, I think for consistency you should try to map the
GCR_CHIPID to the name of the SoC and assign that here

- The "machine" is hardcoded to "NUC900EVB", which in turn looks like
a particular board but not the one you are running on. Maybe read
that from the DT instead?

- The "revision" is not filled at all, I would suggest using something
derived from the GCR_CHIPID register here

- you have two nonstandard attributes "chipid" and "version", which
I'd hope to avoid -- the set of standard attributes is supposed to
give enough information about the machine, and platform independent
user space will never read those.

Arnd

\
 
 \ /
  Last update: 2016-07-11 10:41    [W:0.243 / U:3.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site