lkml.org 
[lkml]   [2016]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 01/10] clk: fix initial state of critical clock's parents
From
Date
Hi Mike,

On Fri, 2016-07-08 at 16:32 -0700, Michael Turquette wrote:
> Hi James,
>
> Quoting James Liao (2016-07-03 20:51:48)
> > On Fri, 2016-07-01 at 18:21 -0700, Stephen Boyd wrote:
> > > (Resending to everyone)
> > >
> > > On 06/22, Erin Lo wrote:
> > > > From: James Liao <jamesjj.liao@mediatek.com>
> > > >
> > > > This patch fixed wrong state of parent clocks if they are registered
> > > > after critical clocks.
> > > >
> > > > Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> > > > Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> > >
> > > It would be nice if you included the information about the
> > > problem from James' previous mail. This says what it does, but
> > > doesn't explain what the problem is and how it is fixing it.
> > >
> > > > ---
> > > > drivers/clk/clk.c | 9 ++++++++-
> > > > 1 file changed, 8 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > > > index d584004..e9f5f89 100644
> > > > --- a/drivers/clk/clk.c
> > > > +++ b/drivers/clk/clk.c
> > > > @@ -2388,8 +2388,15 @@ static int __clk_core_init(struct clk_core *core)
> > > > hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
> > > > struct clk_core *parent = __clk_init_parent(orphan);
> > > >
> > > > - if (parent)
> > > > + if (parent) {
> > > > clk_core_reparent(orphan, parent);
> > > > +
> > > > + if (orphan->prepare_count)
> > > > + clk_core_prepare(parent);
> > > > +
> > > > + if (orphan->enable_count)
> > > > + clk_core_enable(parent);
> > > > + }
> > > > }
> > >
> > > I'm pretty sure I pointed this problem out to Mike when the
> > > critical clk patches were being pushed. I can't recall what the
> > > plan was though to fix the problem. I'm pretty sure he said that
> > > clk_core_reparent() would take care of it, but obviously it is
> > > not doing that. Or perhaps it was that clk handoff should figure
> > > out that the parents of a critical clk are also on and thus keep
> > > them on.
> >
> > Hi Mike
> >
> > Is there any other patch to fix this issue? Or did I misuse critical
> > clock flag?
>
> There is no fix yes. Your fix is basically correct. I was mistaken back
> when I told you and Stephen that the framework already took care of
> this.
>
> However, instead of "open coding" this solution, I would rather re-use
> the __clk_set_parent_{before,after} helpers instead. Can you review/test
> the following patch and let me know what you think?
>
> Thanks,
> Mike
>
>
>
> From c0163b3f719b1e219b28ad425f94f9ef54a25a8f Mon Sep 17 00:00:00 2001
> From: Michael Turquette <mturquette@baylibre.com>
> Date: Fri, 8 Jul 2016 16:05:22 -0700
> Subject: [PATCH] clk: migrate ref counts when orphans are reunited
>
> It's always nice to see families reunited, and this is equally true when
> talking about parent clocks and their children. However, if the orphan
> clk had a positive prepare_count or enable_count, then we would not
> migrate those counts up the parent chain correctly.
>
> This has manifested with the recent critical clocks feature, which often
> enables clocks very early, before their parents have been registered.
>
> Fixed by replacing the call to clk_core_reparent with calls to
> __clk_set_parent_{before,after}.
>
> Cc: James Liao <jamesjj.liao@mediatek.com>
> Cc: Erin Lo <erin.lo@mediatek.com>
> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
> ---
> drivers/clk/clk.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 820a939fb6bb..70efe4c4e0cc 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -2449,8 +2449,14 @@ static int __clk_core_init(struct clk_core *core)
> hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
> struct clk_core *parent = __clk_init_parent(orphan);
>
> - if (parent)
> - clk_core_reparent(orphan, parent);

Is it correct to remove clk_core_reparent()? It lacks
__clk_recalc_accuracies() and __clk_recalc_rates(), so the new parent's
rate will not propagate correctly.

For example, I set vdec_sel as a critical clock. Without your patch, the
result was:

vdecpll 0 0 338000000
vdecpll_ck 1 1 338000000
vdec_sel 1 1 338000000

With your patch, it became:

vdecpll 1 1 338000000
vdecpll_ck 1 1 0
vdec_sel 1 1 0

The prepare_count and enable_count are correct with your patch, but the
rates of vdecpll_ck and vdec_sel become incorrect.


Best regards,

James

> + /*
> + * we could call __clk_set_parent, but that would result in a
> + * reducant call to the .set_rate op, if it exists
> + */
> + if (parent) {
> + __clk_set_parent_before(orphan, parent);
> + __clk_set_parent_after(orphan, parent, NULL);
> + }
> }
>
> /*


\
 
 \ /
  Last update: 2016-07-11 11:01    [W:0.093 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site