lkml.org 
[lkml]   [2016]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC PATCH 1/2] net: ethernet: xilinx: Add gmii2rgmii converter support
Date
Hi Florian,

Thanks for the review.

> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/types.h>
> > +#include <linux/netdevice.h>
> > +#include <linux/mii.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_mdio.h>
> > +#include <linux/xilinx_gmii2rgmii.h>
> > +
> > +static void xgmii2rgmii_fix_mac_speed(void *priv, unsigned int speed)
> > +{
> > + struct gmii2rgmii *xphy = (struct xphy *)priv;
>
> Why not pass struct xphy pointer directly?

Ok will fix in v2...

>
> > + struct phy_device *gmii2rgmii_phydev = xphy->gmii2rgmii_phy_dev;
> > + u16 gmii2rgmii_reg = 0;
> > +
> > + switch (speed) {
> > + case 1000:
> > + gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED1000;
> > + break;
> > + case 100:
> > + gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED100;
> > + break;
> > + default:
> > + return;
> > + }
> > +
> > + xphy->mdio_write(xphy->mii_bus, gmii2rgmii_phydev->mdio.addr,
> > + XILINX_GMII2RGMII_REG_NUM,
> > + gmii2rgmii_reg);
> > +}
> > +
> > +int gmii2rgmii_phyprobe(struct gmii2rgmii *xphy) {
> > + struct device_node *phy_node;
> > + struct phy_device *phydev;
> > + struct device_node *np = (struct device_node *)xphy->platform_data;
> > +
> > + phy_node = of_parse_phandle(np, "gmii2rgmii-phy-handle", 0);
>
> Is that property documented in a binding document?

Will document. Will fix in v2...

>
> > + if (phy_node) {
>
> Should not there be an else clause which does not assign
> xphy->fix_mac_speed in case this property lookup fails?

Will fix in v2...

>
> > + phydev = of_phy_attach(xphy->dev, phy_node, 0, 0);
> > + if (!phydev) {
> > + netdev_err(xphy->dev,
> > + "%s: no gmii to rgmii converter found\n",
> > + xphy->dev->name);
> > + return -1;
> > + }
> > + xphy->gmii2rgmii_phy_dev = phydev;
> > + }
> > + xphy->fix_mac_speed = xgmii2rgmii_fix_mac_speed;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(gmii2rgmii_phyprobe);
> > +
> > +MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/xilinx_gmii2rgmii.h
> > b/include/linux/xilinx_gmii2rgmii.h
> > new file mode 100644
> > index 0000000..64e1659
> > --- /dev/null
> > +++ b/include/linux/xilinx_gmii2rgmii.h
> > @@ -0,0 +1,24 @@
> > +#ifndef _GMII2RGMII_H
> > +#define _GMII2RGMII_H
> > +
> > +#include <linux/of.h>
> > +#include <linux/phy.h>
> > +#include <linux/mii.h>
> > +
> > +#define XILINX_GMII2RGMII_FULLDPLX BMCR_FULLDPLX
> > +#define XILINX_GMII2RGMII_SPEED1000 BMCR_SPEED1000
> > +#define XILINX_GMII2RGMII_SPEED100 BMCR_SPEED100
> > +#define XILINX_GMII2RGMII_REG_NUM 0x10
>
> So the register semantics are fairly standard but not the register location, have
> you considered writing a small PHY driver for this block?

I tried but this PHY doesn't have any vendor / Device ID's
This converter won't suit to PHY framework as we need to programmed the
PHY Control register with the external phy negotiated speed as explained in the other
Mail thread...

Regards,
Kedar.
\
 
 \ /
  Last update: 2016-07-01 18:01    [W:0.038 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site