lkml.org 
[lkml]   [2016]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/9] clocksource/drivers/clksrc-of: Improve error handling
From
Date
On 06/07/2016 11:54 AM, Geert Uytterhoeven wrote:

[ ... ]

> in clockevents/clockevents/next breaks the boot on e.g. r8a7791/koelsch
> (arm32) and r8a7795/salvator-x (arm64).
>
> Using "earlycon keep_bootcon" on koelsch (this doesn't help on arm64)
> reveals it's stuck at:
>
> clocksource_probe: no matching clocksources found
> sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every
> 21474836475000000ns
> Calibrating delay loop...
>
> With the above commit reverted, it works again:
>
> Architected cp15 timer(s) running at 10.00MHz (virt).
> clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
> 0x24e6a1710, max_idle_ns: 440795202120 ns
> sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
> Switching to timer-based delay loop, resolution 100ns
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 20.00 BogoMIPS (lpj=100000)

I think it is fixed now and pushed on my tree. Is it possible to confirm
your boards are working correctly again after the linux-next is updated
with my latest changes ?

Thanks for the report.

-- Daniel


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2016-06-08 16:41    [W:0.190 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site