Messages in this thread | | | Date | Tue, 7 Jun 2016 07:49:39 +0200 | From | Boris Brezillon <> | Subject | Re: [PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table |
| |
On Mon, 6 Jun 2016 22:31:38 +0200 Boris Brezillon <boris.brezillon@free-electrons.com> wrote:
> On Mon, 6 Jun 2016 22:59:03 +0300 > Aleksei Mamlin <mamlinav@gmail.com> wrote: > > > On Mon, 6 Jun 2016 20:55:49 +0200 > > Boris Brezillon <boris.brezillon@free-electrons.com> wrote: > > > > > On Mon, 6 Jun 2016 13:24:22 +0300 > > > Aleksei Mamlin <mamlinav@gmail.com> wrote: > > > > > > > Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the > > > > nand_ids table so that we can later use the NAND ECC infos and ONFI timings > > > > mode in controller drivers. > > > > > > Still hoping to get this series [1] merged in 4.8, but if that's > > > not the case, I'll apply your patch. > > > > > > BTW, that would be great if you could test it on your platforms. > > > > > > > It seems that Hynix-specific initialization code can't handle H27UBG8T2BTR-BC > > chip: > > > > [ 0.886153] nand: Could not find valid ONFI parameter page; aborting > > [ 0.892665] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xd7 > > [ 0.899025] nand: Hynix 1c03000.nand > > [ 0.902596] nand: bus width 8 instead 16 bit > > [ 0.906858] nand: No NAND device found > > [ 0.910620] sunxi_nand 1c03000.nand: failed to init nand chips > > [ 0.916528] sunxi_nand: probe of 1c03000.nand failed with error -22 > > Can you try this patch? It should fix the problem [1].
Brian, I have a question regarding the extended NAND ids (not full-ids) defined in the nand_ids table. Are they really valid for all vendors?
If that's the case, why are we extracting the bus width from the id[3] since we already have this information in the options field?
> > [1]http://code.bulix.org/6hjww1-100494 > >
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |