lkml.org 
[lkml]   [2016]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: rockchip: add the power domain node for rk3399
Thanks your reviewing!

On 2016年07月01日 05:57, Heiko Stuebner wrote:
> Am Donnerstag, 30. Juni 2016, 14:49:41 schrieb Doug Anderson:
>> Caesar,
>>
>> On Wed, Jun 29, 2016 at 6:56 PM, Caesar Wang <wxt@rock-chips.com> wrote:
>>> From: Elaine Zhang <zhangqing@rock-chips.com>
>>>
>>> In order to meet low power requirements, a power management unit (PMU)
>>> is
>>> designed for controlling power resources in RK3399. The RK3399 PMU is
>>> dedicated for managing the power of the whole chip.
>>>
>>> 1. add pd node for RK3399 Soc
>>> 2. create power domain tree
>>> 3. add qos node for domain
>>>
>>> From the DT/binds and driver can get more detail information:
>>> The driver:
>>> drivers/soc/rockchip/pm_domains.c
>>> The document:
>>> Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>
>>> ---
>>>
>>> Tested on vop and gpu devices added for next kernel.
>>> PD:
>>> localhost / # cat sys/kernel/debug/pm_genpd/pm_genpd_summary
>> Nit: can you put a "/" before "sys" here and elsewhere in your patches?
>>
>>> domain status slaves
>>> /device runtime status
>>> ----------------------------------------------------------------------
>>> pd_gpu on
>>> /devices/platform/ff9a0000.gpu active
>>> pd_vopl off
>>> /devices/platform/ff8f0000.vop suspended
>>> pd_vopb off
>>> /devices/platform/ff900000.vop suspended
>>> pd_vo off pd_vopb, pd_vopl
>>> pd_hdcp off
>>> ...
>>> pd_iep off
>>> pd_vcodec off
>>> pd_vdu off
>>>
>>> QOS:
>>> localhost / # cat sys/kernel/debug/pm_qos/
>>> cpu_dma_latency network_latency
>>> memory_bandwidth network_throughput
>> What is this supposed to be showing exactly? You can't "cat" a
>> directory, so maybe you meant "ls"?
>>
>> Also, each of these files contains the string "Empty!" and these files
>> seem fairly unconnected to your patch. Those files exist both before
>> and after your patch and nothing that I can see in the Rockchip QoS
>> stuff hooks up to the generic Linux QoS infrastructure. The power
>> domains just save and restore the QoS--they don't actually allow
>> settting it.
> personally, I would just drop that debugfs-dump, as I don't see what we gain
> from it :-).

Agreed, drop it.

>>> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
>>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>>> ---
> [...]
>
>>> + pmu: power-management@ff310000 {
>>> + compatible = "rockchip,rk3399-pmu", "syscon",
>>> "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>;
>>> +
>>> + power: power-controller {
>>> + status = "okay";
>>> + compatible = "rockchip,rk3399-power-controller";
>>> + #power-domain-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + pd_vdu {
>>> + reg = <RK3399_PD_VDU>;
>>> + clocks = <&cru ACLK_VDU>,
>>> + <&cru HCLK_VDU>;
>>> + pm_qos = <&qos_video_m1_r>,
>>> + <&qos_video_m1_w>;
>>> + };
>>> + pd_vcodec {
>>> + reg = <RK3399_PD_VCODEC>;
>>> + clocks = <&cru ACLK_VCODEC>,
>>> + <&cru HCLK_VCODEC>;
>>> + pm_qos = <&qos_video_m0>;
>>> + };
>>> + pd_iep {
>>> + reg = <RK3399_PD_IEP>;
>>> + clocks = <&cru ACLK_IEP>,
>>> + <&cru HCLK_IEP>;
>>> + pm_qos = <&qos_iep>;
>>> + };
>>> + pd_rga {
>>> + reg = <RK3399_PD_RGA>;
>>> + clocks = <&cru ACLK_RGA>,
>>> + <&cru HCLK_RGA>;
>>> + pm_qos = <&qos_rga_r>,
>>> + <&qos_rga_w>;
>>> + };
>>> + pd_vio {
>>> + reg = <RK3399_PD_VIO>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + pd_isp0 {
>>> + reg = <RK3399_PD_ISP0>;
>>> + clocks = <&cru ACLK_ISP0>,
>>> + <&cru HCLK_ISP0>;
>>> + pm_qos = <&qos_isp0_m0>,
>>> + <&qos_isp0_m1>;
>>> + };
>>> + pd_isp1 {
>>> + reg = <RK3399_PD_ISP1>;
>>> + clocks = <&cru ACLK_ISP1>,
>>> + <&cru HCLK_ISP1>;
>>> + pm_qos = <&qos_isp1_m0>,
>>> + <&qos_isp1_m1>;
>>> + };
>>> + pd_hdcp {
>>> + reg = <RK3399_PD_HDCP>;
>>> + clocks = <&cru ACLK_HDCP>,
>>> + <&cru HCLK_HDCP>,
>>> + <&cru PCLK_HDCP>;
>>> + pm_qos = <&qos_hdcp>;
>>> + };
>>> + pd_vo {
>>> + reg = <RK3399_PD_VO>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + pd_vopb {
>>> + reg = <RK3399_PD_VOPB>;
>>> + clocks = <&cru
>>> ACLK_VOP0>, +
>>> <&cru HCLK_VOP0>; +
>>> pm_qos = <&qos_vop_big_r>, +
>>> <&qos_vop_big_w>; +
>>> };
>>> + pd_vopl {
>>> + reg = <RK3399_PD_VOPL>;
>>> + clocks = <&cru
>>> ACLK_VOP1>, +
>>> <&cru HCLK_VOP1>; +
>>> pm_qos = <&qos_vop_little>; + };
>>> + };
>>> + };
>>> + pd_gpu {
>>> + reg = <RK3399_PD_GPU>;
>>> + clocks = <&cru ACLK_GPU>;
>>> + pm_qos = <&qos_gpu>;
>>> + };
>> Again a nitty sort order question. Is there a reason not to make
>> things alphabetical? AKA: pd_gpu, pd_iep, pd_rga, ...
>>
>> ...and inside pd_vio should be alphabetical too?
>>
>> In the TRM it looks like some of the power domains are grouped
>> together (like all the domains under LOGIC or CENTERLOGIC). If
>> keeping that grouping makes sense here then you should add a comment
>> at the start of each group and sort the groups sanely (and sort within
>> each group).

Okay, let me see it.

Thanks!

>>
>> It looks like there are also more power domains that you haven't
>> listed here (like PD_GMAC, for instance, or PD_CORE_L). Are you
>> planning to add those in a followon patch?
> that reminds me, nodes with a reg property should have the base address in
> the node name as well. Using the constant works nicely, as can be seen on
> the rk3288 where we have for example:
>
> pd_vio@RK3288_PD_VIO

Agreed.


>
>
> Heiko
>
>
>

--
caesar wang | software engineer | wxt@rock-chip.com


\
 
 \ /
  Last update: 2016-07-01 05:01    [W:0.062 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site