lkml.org 
[lkml]   [2016]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/4] spi: Document option to wake a device by toggling CS
CC devicetree

On Thu, Jun 30, 2016 at 5:54 AM, <apronin@chromium.org> wrote:
> From: Andrey Pronin <apronin@chromium.org>
>
> Some SPI devices may go to sleep after a period of inactivity
> on SPI. For such devices, if enough time has passed since the
> last SPI transaction, toggle CS and wait for the device to
> start before communicating with it.
>
> Signed-off-by: Andrey Pronin <apronin@chromium.org>
> ---
> Documentation/devicetree/bindings/spi/spi-bus.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
> index 42d5954..1b7ffd4 100644
> --- a/Documentation/devicetree/bindings/spi/spi-bus.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
> @@ -63,6 +63,13 @@ contain the following properties.
> used for MISO. Defaults to 1 if not present.
> - spi-rx-delay-us - (optional) Microsecond delay after a read transfer.
> - spi-tx-delay-us - (optional) Microsecond delay after a write transfer.
> +- cs-wake-after-sleep - (optional) Device may go to sleep after a period
> + of SPI inactivity. If this flag is set, toggle CS and
> + wait for it to wake before communicating to it.
> +- cs-sleep-delay - (optional) Delay after which the device may go to
> + sleep if there was no SPI activity (msec).
> +- cs-wake-duration - (optional) Time it takes the device to wake up after
> + toggling CS if it went to sleep (msec).
>
> Some SPI controllers and devices support Dual and Quad SPI transfer mode.
> It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD).
> --
> 2.6.6

\
 
 \ /
  Last update: 2016-06-30 09:41    [W:0.452 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site