lkml.org 
[lkml]   [2016]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/7] PCI: Do not disable memory decoding in pci_reassigndev_resource_alignment()
Date
We should not disable memory decoding when we reassign alignment
in pci_reassigndev_resource_alignment(). It's meaningless and
have some side effect. For example, some fixup functions such as
quirk_e100_interrupt() read PCI_COMMAND_MEMORY to know whether
the devices has been initialized by the firmware or not. If we
disable memory decoding here, these functions will get a wrong
information that the devices was not initialized by the firmware
which may cause a wrong fixup. Besides, disabling memory decoding
may also break some devices that need to have memory decoding
always-on during probing.

Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
---
drivers/pci/pci.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6ae02de..6241cfc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4820,7 +4820,6 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
int i;
struct resource *r;
resource_size_t align, size;
- u16 command;

/* We should never try to reassign VF's alignment */
if (dev->is_virtfn)
@@ -4838,12 +4837,7 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
return;
}

- dev_info(&dev->dev,
- "Disabling memory decoding and releasing memory resources.\n");
- pci_read_config_word(dev, PCI_COMMAND, &command);
- command &= ~PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, command);
-
+ dev_info(&dev->dev, "Releasing memory resources.\n");
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
r = &dev->resource[i];
if (!(r->flags & IORESOURCE_MEM))
--
1.7.9.5
\
 
 \ /
  Last update: 2016-06-30 13:41    [W:0.204 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site