lkml.org 
[lkml]   [2016]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] hwmon: (tmp102) Rework chip configuration
Date
So far the chip was forced into polarity 0, even if it was preconfigured
differently. Do not touch the polarity when configuring the chip.

Also, the configuration register was read beack to check if the
configuration 'sticks'. Ultimately, that is similar to checking if the
chip is a tmp102 in the first place. Checking if a write into the
configuration register was successful is really not the way to do it,
and quite risky if the chip is not a tmp102, so drop that check.
Instead, verify if the configuration register has unexpected bits set
before writing into it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3: No change
v2: No change

drivers/hwmon/tmp102.c | 37 ++++++++++++++++++++++---------------
1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index fd4a4515692a..82a8a29af2e4 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -47,6 +47,17 @@
#define TMP102_TLOW_REG 0x02
#define TMP102_THIGH_REG 0x03

+#define TMP102_CONFREG_MASK (TMP102_CONF_SD | TMP102_CONF_TM | \
+ TMP102_CONF_POL | TMP102_CONF_F0 | \
+ TMP102_CONF_F1 | TMP102_CONF_OS | \
+ TMP102_CONF_EM | TMP102_CONF_AL | \
+ TMP102_CONF_CR0 | TMP102_CONF_CR1)
+
+#define TMP102_CONFIG_CLEAR (TMP102_CONF_SD | TMP102_CONF_OS | \
+ TMP102_CONF_CR0)
+#define TMP102_CONFIG_SET (TMP102_CONF_TM | TMP102_CONF_EM | \
+ TMP102_CONF_CR1)
+
#define CONVERSION_TIME_MS 35 /* in milli-seconds */

struct tmp102 {
@@ -167,9 +178,6 @@ static struct attribute *tmp102_attrs[] = {
};
ATTRIBUTE_GROUPS(tmp102);

-#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
-#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
-
static const struct thermal_zone_of_device_ops tmp102_of_thermal_ops = {
.get_temp = tmp102_read_temp,
};
@@ -210,26 +218,25 @@ static int tmp102_probe(struct i2c_client *client,
dev_err(dev, "error reading config register\n");
return status;
}
+
+ if ((status & ~TMP102_CONFREG_MASK) !=
+ (TMP102_CONF_R0 | TMP102_CONF_R1)) {
+ dev_err(dev, "unexpected config register value\n");
+ return -ENODEV;
+ }
+
tmp102->config_orig = status;

devm_add_action(dev, tmp102_restore_config, tmp102);

- status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
- TMP102_CONFIG);
+ status &= ~TMP102_CONFIG_CLEAR;
+ status |= TMP102_CONFIG_SET;
+
+ status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, status);
if (status < 0) {
dev_err(dev, "error writing config register\n");
return status;
}
- status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
- if (status < 0) {
- dev_err(dev, "error reading config register\n");
- return status;
- }
- status &= ~TMP102_CONFIG_RD_ONLY;
- if (status != TMP102_CONFIG) {
- dev_err(dev, "config settings did not stick\n");
- return -ENODEV;
- }

mutex_init(&tmp102->lock);

--
2.5.0
\
 
 \ /
  Last update: 2016-06-30 06:21    [W:0.062 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site