lkml.org 
[lkml]   [2016]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] sm501: Add device property
Oh, and the subject line needs to reflect the subsystem you are
submitting to.

On Wed, 29 Jun 2016, Lee Jones wrote:
> On Tue, 28 Jun 2016, Yoshinori Sato wrote:
>
> > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> > ---
> > Documentation/devicetree/bindings/mfd/sm501.txt | 45 +++++++++++++++++++++++++
>
> This needs a DT Ack, but you haven't sent it to the DT list.
>
> Did you run ./scripts/get_maintainer.pl?
>
> > drivers/mfd/sm501.c | 9 +++++
> > 2 files changed, 54 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/sm501.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/sm501.txt b/Documentation/devicetree/bindings/mfd/sm501.txt
> > new file mode 100644
> > index 0000000..9290094
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/sm501.txt
> > @@ -0,0 +1,45 @@
> > +* SM SM501
> > +
> > +The SM SM501 is a LCD controller, with proper hardware, it can also
> > +drive DVI monitors.
> > +
> > +Required properties:
> > +- compatible : should be "smi,sm501".
> > +- reg : contain two entries:
> > + - First entry: System Configuration register
> > + - Second entry: IO space (Display Controller register)
> > +- interrupts : SMI interrupt to the cpu should be described here.
> > +- interrupt-parent : the phandle for the interrupt controller that
> > + services interrupts for this device.
> > +
> > +Optional properties:
> > +- mode : select a video mode:
> > + <xres>x<yres>[-<bpp>][@<refresh>]
> > +- edid : verbatim EDID data block describing attached display.
> > + Data from the detailed timing descriptor will be used to
> > + program the display controller.
> > +- little-endian: available on big endian systems, to
> > + set different foreign endian.
> > +- big-endian: available on little endian systems, to
> > + set different foreign endian.
> > +- smi,devices: function block enable bitmap.
> > + bit0: USB host
> > + bit1: USB slave
> > + bit2: SSP Ch0
> > + bit3: SSP Ch1
> > + bit4: UART Ch0
> > + bit5: UART Ch1
> > + bit6: Accelerator
> > + bit7: AC97
> > + bit8: I2S
> > + bit9: GPIO
> > +
> > +Example for MPC5200:
> > + display@1,0 {
> > + compatible = "smi,sm501";
> > + reg = <1 0x00000000 0x00800000
> > + 1 0x03e00000 0x00200000>;
> > + interrupts = <1 1 3>;
> > + mode = "640x480-32@60";
> > + edid = [edid-data];
> > + };
> > diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> > index 65cd0d2..e2e3f9b 100644
> > --- a/drivers/mfd/sm501.c
> > +++ b/drivers/mfd/sm501.c
> > @@ -21,6 +21,7 @@
> > #include <linux/pci.h>
> > #include <linux/i2c-gpio.h>
> > #include <linux/slab.h>
> > +#include <linux/of.h>
> >
> > #include <linux/sm501.h>
> > #include <linux/sm501-regs.h>
> > @@ -1377,6 +1378,8 @@ static int sm501_plat_probe(struct platform_device *dev)
> > {
> > struct sm501_devdata *sm;
> > int ret;
> > + struct sm501_platdata private_platdata;
> > + struct sm501_initdata private_initdata;
> >
> > sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
> > if (sm == NULL) {
> > @@ -1388,6 +1391,12 @@ static int sm501_plat_probe(struct platform_device *dev)
> > sm->dev = &dev->dev;
> > sm->pdev_id = dev->id;
> > sm->platdata = dev_get_platdata(&dev->dev);
> > + if (!sm->platdata) {
> > + of_property_read_u32(dev->dev.of_node, "smi,devices",
> > + (u32 *)&private_initdata.devices);
> > + private_platdata.init = &private_initdata;
> > + sm->platdata = &private_platdata;
> > + }
>
> This is still really horrible.
>
> Where is this platform data consumed?
>
> > ret = platform_get_irq(dev, 0);
> > if (ret < 0) {
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-06-29 10:41    [W:0.763 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site