lkml.org 
[lkml]   [2016]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[v4 PATCH 0/5] Rockchip Type-C and DispplayPort driver
Date

Hi all

This series patch is for rockchip Type-C phy and DisplayPort controller
driver.

The USB Type-C PHY is designed to support the USB3 and DP applications.
The PHY basically has two main components: USB3 and DisplyPort. USB3
operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2
data rates. The Type-C cable orientation detection and Power Delivery
(PD) is accomplished using a PD PHY or a exernal PD chip.

The DP controller is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work, please
put the firmware file to /lib/firmware/cdn/dptx.bin. The uCPU in charge
of aux communication and link training, the host use mailbox to
communicate with the ucpu.

The DP contoller has register a notification with extcon API, to get the
alt mode from PD, the PD driver need call the devm_extcon_dev_allocate
to create a extcon device and use extcon_set_state to notify DP
controller.

About the DP audio, cdn-dp registered 2 DAIs: 0 is I2S, 1 is SPDIF.
We can reference them in simple-card.

This series is based on Mark Yao's branch:
https://github.com/markyzq/kernel-drm-rockchip/tree/drm-rockchip-next-2016-05-23

I test this patches on the rk3399-evb board, with a fusb302 driver,
this branch has no rk3399.dtsi, so the patch about dts is not included
in this series.


Changes in v4:
- remove DP alt mode
- add a #phy-cells node
- select EXTCON
- use phy framework to control the USB3 and DP function
- rename PIN_MAP_ to PIN_ASSIGN_
- add a reset node
- support 2 phys
- use phy framework to control DP phy
- support 2 phys

Changes in v3:
- use compatible: rockchip,rk3399-typec-phy
- use dashes instead of underscores.
- remove the phy framework(Kishon Vijay Abraham I)
- add parentheses around the macro
- use a single space between type and name
- add spaces after opening and before closing braces.
- use u16 for register value
- remove type-c phy header file
- CodingStyle optimization
- use some cable extcon to get type-c port information
- add a extcon to notify Display Port
- add SoC specific compatible string
- remove reg = <1>;
- use EXTCON_DISP_DP and EXTCON_DISP_DP_ALT cable to get dp port state.
- reset spdif before config it
- modify the firmware clk to 100Mhz
- retry load firmware if fw file is requested too early

Changes in v2:
- add some registers description
- select RESET_CONTROLLER
- alphabetic order
- modify some spelling mistakes
- make mode cleaner
- use bool for enable/disable
- check all of the return value
- return a better err number
- use more readx_poll_timeout()
- clk_disable_unprepare(tcphy->clk_ref);
- remove unuse functions, rockchip_typec_phy_power_on/off
- remove unnecessary typecast from void *
- use dts node to distinguish between phys.
- Alphabetic order
- remove excess error message
- use define clk_rate
- check all return value
- remove dev_set_name(dp->dev, "cdn-dp");
- use schedule_delayed_work
- remove never-called functions
- remove some unnecessary ()

Changes in v1:
- add extcon node description
- move the registers in phy driver
- remove the suffix of reset
- update the licence note
- init core clock to 50MHz
- use extcon API
- remove unused global
- add some comments for magic num
- change usleep_range(1000, 2000) tousleep_range(1000, 1050)
- remove __func__ from dev_err
- return err number when get clk failed
- remove ADDR_ADJ define
- use devm_clk_get(&pdev->dev, "tcpdcore")
- add extcon node description
- add #sound-dai-cells description
- use extcon API
- use hdmi-codec for the DP Asoc
- do not initialize the "ret"
- printk a err log when drm_of_encoder_active_endpoint_id
- modify the dclk pin_pol to a single line

Chris Zhong (5):
extcon: Add Type-C and DP support
Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
phy: Add USB Type-C PHY driver for rk3399
Documentation: bindings: add dt documentation for cdn DP controller
drm/rockchip: cdn-dp: add cdn DP support for rk3399

.../bindings/display/rockchip/cdn-dp-rockchip.txt | 67 ++
.../devicetree/bindings/phy/phy-rockchip-typec.txt | 77 ++
drivers/extcon/extcon.c | 5 +
drivers/gpu/drm/rockchip/Kconfig | 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/cdn-dp-core.c | 761 ++++++++++++++++
drivers/gpu/drm/rockchip/cdn-dp-core.h | 113 +++
drivers/gpu/drm/rockchip/cdn-dp-reg.c | 731 ++++++++++++++++
drivers/gpu/drm/rockchip/cdn-dp-reg.h | 404 +++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 2 +
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-typec.c | 963 +++++++++++++++++++++
include/linux/extcon.h | 5 +
16 files changed, 3155 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-core.c
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-core.h
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.h
create mode 100644 drivers/phy/phy-rockchip-typec.c

--
2.6.3

\
 
 \ /
  Last update: 2016-06-28 15:01    [W:0.057 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site