lkml.org 
[lkml]   [2016]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] regulator: qcom_spmi: Add support for get_mode/set_mode on switches
Date
The voltage switches support mode switching, so add support for
these ops to those types of regulators.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/regulator/qcom_spmi-regulator.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 43f8f20b82e9..16c5f84e06a7 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1085,6 +1085,8 @@ static struct regulator_ops spmi_vs_ops = {
.set_pull_down = spmi_regulator_common_set_pull_down,
.set_soft_start = spmi_regulator_common_set_soft_start,
.set_over_current_protection = spmi_regulator_vs_ocp,
+ .set_mode = spmi_regulator_common_set_mode,
+ .get_mode = spmi_regulator_common_get_mode,
};

static struct regulator_ops spmi_boost_ops = {
--
2.9.0.rc2.8.ga28705d
\
 
 \ /
  Last update: 2016-06-26 08:21    [W:0.051 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site