lkml.org 
[lkml]   [2016]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] regulator: tps65218: force set power-up/down strobe to 3 for dcdc3
Date
From: Tero Kristo <t-kristo@ti.com>

The reset value for this register seems broken on certain versions of
tps65218 chip, so make sure the dcdc3 settings is proper. Needed for
proper functionality of rtc+ddr / rtc-only modes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/regulator/tps65218-regulator.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 8eca1eb..d1e631d 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -180,8 +180,12 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
return -EINVAL;

- if (!tps->info[rid]->strobe)
- return -EINVAL;
+ if (!tps->info[rid]->strobe) {
+ if (rid == TPS65218_DCDC_3)
+ tps->info[rid]->strobe = 3;
+ else
+ return -EINVAL;
+ }

return tps65218_set_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
--
1.9.1
\
 
 \ /
  Last update: 2016-06-24 11:21    [W:0.182 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site