lkml.org 
[lkml]   [2016]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 4/7] Documentation: dt: socfpga: Add Arria10 Ethernet binding
On Mon, Jun 20, 2016 at 09:50:49AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
>
> Add the device tree bindings needed to support the Altera Ethernet
> FIFO buffers on the Arria10 chip.
>
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2 No Change
> v3 Change to common compatible string based on maintainer comments
> Add local IRQ values.
> v4 Add compatible string for parent node.
> ---
> .../bindings/arm/altera/socfpga-eccmgr.txt | 24 ++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
> index 15eb0df..7c714ba 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
> @@ -82,6 +82,14 @@ Required Properties:
> - interrupts : Should be single bit error interrupt, then double bit error
> interrupt, in this order.
>
> +Ethernet FIFO ECC
> +Required Properties:
> +- compatible : Should be "altr,socfpga-eth-mac-ecc"
> +- reg : Address and size for ECC block registers.
> +- parent : phandle to parent (altr,socfpga-stmmac) Ethernet node.

Sorry if I wasn't clear before, but I was suggesting changing 'parent'
to 'altr,ethernet-mac':

altr,ethernet-mac = <&gmac0>;

Rob

\
 
 \ /
  Last update: 2016-06-21 16:21    [W:0.099 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site