Messages in this thread | | | From | "Andrew F. Davis" <> | Subject | [PATCH v4 0/2] Add support for SYSCON reset | Date | Mon, 20 Jun 2016 13:46:05 -0500 |
| |
Some SoCs contain reset controls for modules that are memory-mapped to areas shared with other module configuration settings. This requires synchronization across all drivers accessing this memory area. This series adds a generic SYSCON reset driver to allow resets toggled by bits in memory-mapped registers through SYSCON.
Changes from v3: - Add depends on HAS_IOMEM to Kconfig - Re-worked naming to be more TI specific for now - Changed DT binding to Philipp's suggestion
Changes from v2: - Rebased on v4.7-rc1 - Removed the need to give reset specifier nodes an index address
Changes from v1: - Reset control information is now described in the reset node, this keeps the reset information centralized for easy verification - Other small fixups
Andrew F. Davis (2): Documentation: dt: reset: Add TI syscon reset binding reset: add TI SYSCON based reset driver
.../devicetree/bindings/reset/ti-syscon-reset.txt | 83 +++++++ drivers/reset/Kconfig | 11 + drivers/reset/Makefile | 1 + drivers/reset/reset-ti-syscon.c | 260 +++++++++++++++++++++ include/dt-bindings/reset/ti-syscon.h | 30 +++ 5 files changed, 385 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/ti-syscon-reset.txt create mode 100644 drivers/reset/reset-ti-syscon.c create mode 100644 include/dt-bindings/reset/ti-syscon.h
-- 2.9.0
| |