lkml.org 
[lkml]   [2016]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] mfd: stmpe: move platform data into mfd driver
On Wed, 25 May 2016, Linus Walleij wrote:

> The STMPE platform data is only populated from the device tree
> in all existing users, so push the struct and make the OF case
> the norm.
>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Drop check for (!np) NULL device node: as Lee notices, this
> can no longer happen on a pure DT driver.
> ---
> drivers/mfd/stmpe.c | 40 ++++++++++++++++++++++++++++------------
> include/linux/mfd/stmpe.h | 22 +---------------------
> 2 files changed, 29 insertions(+), 33 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index fb8f9e8b75df..94c7cc02fdab 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -23,6 +23,27 @@
> #include <linux/regulator/consumer.h>
> #include "stmpe.h"
>
> +/**
> + * struct stmpe_platform_data - STMPE platform data
> + * @id: device id to distinguish between multiple STMPEs on the same board
> + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
> + * @irq_trigger: IRQ trigger to use for the interrupt to the host
> + * @autosleep: bool to enable/disable stmpe autosleep
> + * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
> + * @irq_over_gpio: true if gpio is used to get irq
> + * @irq_gpio: gpio number over which irq will be requested (significant only if
> + * irq_over_gpio is true)
> + */
> +struct stmpe_platform_data {
> + int id;
> + unsigned int blocks;
> + unsigned int irq_trigger;
> + bool autosleep;
> + bool irq_over_gpio;
> + int irq_gpio;
> + int autosleep_timeout;
> +};
> +
> static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
> {
> return stmpe->variant->enable(stmpe, blocks, true);
> @@ -1187,24 +1208,19 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata,
> /* Called from client specific probe routines */
> int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
> {
> - struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
> + struct stmpe_platform_data *pdata;
> struct device_node *np = ci->dev->of_node;
> struct stmpe *stmpe;
> int ret;
>
> - if (!pdata) {
> - if (!np)
> - return -EINVAL;
> -
> - pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
> - if (!pdata)
> - return -ENOMEM;
> + pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
>
> - stmpe_of_probe(pdata, np);
> + stmpe_of_probe(pdata, np);
>
> - if (of_find_property(np, "interrupts", NULL) == NULL)
> - ci->irq = -1;
> - }
> + if (of_find_property(np, "interrupts", NULL) == NULL)
> + ci->irq = -1;
>
> stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
> if (!stmpe)
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index cb83883918a7..de748bc7525e 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -62,6 +62,7 @@ enum {
>
> struct stmpe_variant_info;
> struct stmpe_client_info;
> +struct stmpe_platform_data;
>
> /**
> * struct stmpe - STMPE MFD structure
> @@ -117,25 +118,4 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
>
> #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
>
> -/**
> - * struct stmpe_platform_data - STMPE platform data
> - * @id: device id to distinguish between multiple STMPEs on the same board
> - * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
> - * @irq_trigger: IRQ trigger to use for the interrupt to the host
> - * @autosleep: bool to enable/disable stmpe autosleep
> - * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
> - * @irq_over_gpio: true if gpio is used to get irq
> - * @irq_gpio: gpio number over which irq will be requested (significant only if
> - * irq_over_gpio is true)
> - */
> -struct stmpe_platform_data {
> - int id;
> - unsigned int blocks;
> - unsigned int irq_trigger;
> - bool autosleep;
> - bool irq_over_gpio;
> - int irq_gpio;
> - int autosleep_timeout;
> -};
> -
> #endif

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-06-20 12:21    [W:0.045 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site