Messages in this thread | | | Date | Sat, 18 Jun 2016 17:59:46 +0200 | From | Pavel Machek <> | Subject | N900, wl1251: wifi is now slow, even with powersave off |
| |
Hi!
Ping to N900:
64 bytes from maemo (10.0.0.8): icmp_seq=187 ttl=64 time=124 ms 64 bytes from maemo (10.0.0.8): icmp_seq=188 ttl=64 time=131 ms 64 bytes from maemo (10.0.0.8): icmp_seq=189 ttl=64 time=66.7 ms ^C --- maemo ping statistics --- 189 packets transmitted, 189 received, 0% packet loss, time 188742ms rtt min/avg/max/mdev = 4.382/101.866/453.145/42.395 ms root@duo:/data/pavel#
Now on n900:
pavel@n900:/my/tui/ofone$ sudo iw dev wlan0 set power_save off pavel@n900:/my/tui/ofone$
That should bring ping back to < 2 msec range, but nothing changes:
root@duo:/data/pavel# ping maemo PING maemo (10.0.0.8) 56(84) bytes of data. 64 bytes from maemo (10.0.0.8): icmp_seq=1 ttl=64 time=78.5 ms 64 bytes from maemo (10.0.0.8): icmp_seq=2 ttl=64 time=101 ms 64 bytes from maemo (10.0.0.8): icmp_seq=3 ttl=64 time=18.2 ms 64 bytes from maemo (10.0.0.8): icmp_seq=4 ttl=64 time=37.5 ms 64 bytes from maemo (10.0.0.8): icmp_seq=5 ttl=64 time=58.2 ms 64 bytes from maemo (10.0.0.8): icmp_seq=6 ttl=64 time=77.6 ms 64 bytes from maemo (10.0.0.8): icmp_seq=7 ttl=64 time=98.3 ms 64 bytes from maemo (10.0.0.8): icmp_seq=8 ttl=64 time=118 ms 64 bytes from maemo (10.0.0.8): icmp_seq=9 ttl=64 time=35.8 ms 64 bytes from maemo (10.0.0.8): icmp_seq=10 ttl=64 time=55.7 ms ^C --- maemo ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9034ms rtt min/avg/max/mdev = 18.298/68.025/118.223/30.756 ms root@duo:/data/pavel#
Any ideas what is going on there?
Best regards, Pavel
-- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
| |