Messages in this thread | | | Date | Fri, 17 Jun 2016 18:27:28 +0200 | From | Borislav Petkov <> | Subject | Re: [patch] events/amd/power add support for fam16h model30h |
| |
On Fri, Jun 17, 2016 at 11:56:31AM -0400, Vince Weaver wrote: > Has anyone actually verified that the fam15h excavator machines are > producing "stable" results?
Not that I know of. Rui, any ideas?
> I know on my fam15h piledriver machines the results returned by the > drivers/hwmon/fam15h_power.c driver look questionable at best, which > is what started my trying to figure this whole thing out in the first > place.
Piledriver? What f/m/s is that?
Because I have a PD here - AMD FX(tm)-8350 Eight-Core Processor - F15hM02 and sensors gives only this below. But my PD doesn't have X86_FEATURE_ACC_POWER.
$ sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +18.4°C (high = +70.0°C) (crit = +90.0°C, hyst = +87.0°C)
fam15h_power-pci-00c4 Adapter: PCI adapter power1: 19.38 W (crit = 125.19 W)
radeon-pci-0100 Adapter: PCI adapter temp1: +85.0°C ---
Do you mean this PCI adapter thing?
I can get it right up to crit when building a kernel:
power1: 124.76 W (crit = 125.19 W)
-- Regards/Gruss, Boris.
ECO tip #101: Trim your mails when you reply.
| |