lkml.org 
[lkml]   [2016]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch V2 13/20] timer: Remove slack leftovers
We now have implicit batching in the timer wheel. The slack is not longer
used. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: rt@linutronix.de
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>


---
block/genhd.c | 5 -----
drivers/mmc/host/jz4740_mmc.c | 2 --
drivers/power/bq27xxx_battery.c | 5 +----
drivers/usb/host/ohci-hcd.c | 1 -
drivers/usb/host/xhci.c | 2 --
include/linux/timer.h | 4 ----
kernel/time/timer.c | 19 -------------------
lib/random32.c | 1 -
8 files changed, 1 insertion(+), 38 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1523,12 +1523,7 @@ static void __disk_unblock_events(struct
if (--ev->block)
goto out_unlock;

- /*
- * Not exactly a latency critical operation, set poll timer
- * slack to 25% and kick event check.
- */
intv = disk_events_poll_jiffies(disk);
- set_timer_slack(&ev->dwork.timer, intv / 4);
if (check_now)
queue_delayed_work(system_freezable_power_efficient_wq,
&ev->dwork, 0);
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1068,8 +1068,6 @@ static int jz4740_mmc_probe(struct platf
jz4740_mmc_clock_disable(host);
setup_timer(&host->timeout_timer, jz4740_mmc_timeout,
(unsigned long)host);
- /* It is not important when it times out, it just needs to timeout. */
- set_timer_slack(&host->timeout_timer, HZ);

host->use_dma = true;
if (host->use_dma && jz4740_mmc_acquire_dma_channels(host) != 0)
--- a/drivers/power/bq27xxx_battery.c
+++ b/drivers/power/bq27xxx_battery.c
@@ -735,11 +735,8 @@ static void bq27xxx_battery_poll(struct

bq27xxx_battery_update(di);

- if (poll_interval > 0) {
- /* The timer does not have to be accurate. */
- set_timer_slack(&di->work.timer, poll_interval * HZ / 4);
+ if (poll_interval > 0)
schedule_delayed_work(&di->work, poll_interval * HZ);
- }
}

/*
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -500,7 +500,6 @@ static int ohci_init (struct ohci_hcd *o

setup_timer(&ohci->io_watchdog, io_watchdog_func,
(unsigned long) ohci);
- set_timer_slack(&ohci->io_watchdog, msecs_to_jiffies(20));

ohci->hcca = dma_alloc_coherent (hcd->self.controller,
sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -490,8 +490,6 @@ static void compliance_mode_recovery_tim
xhci->comp_mode_recovery_timer.expires = jiffies +
msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);

- set_timer_slack(&xhci->comp_mode_recovery_timer,
- msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
add_timer(&xhci->comp_mode_recovery_timer);
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Compliance mode recovery timer initialized");
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -19,7 +19,6 @@ struct timer_list {
void (*function)(unsigned long);
unsigned long data;
u32 flags;
- int slack;

#ifdef CONFIG_TIMER_STATS
int start_pid;
@@ -73,7 +72,6 @@ struct timer_list {
.expires = (_expires), \
.data = (_data), \
.flags = (_flags), \
- .slack = -1, \
__TIMER_LOCKDEP_MAP_INITIALIZER( \
__FILE__ ":" __stringify(__LINE__)) \
}
@@ -193,8 +191,6 @@ extern int del_timer(struct timer_list *
extern int mod_timer(struct timer_list *timer, unsigned long expires);
extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);

-extern void set_timer_slack(struct timer_list *time, int slack_hz);
-
/*
* The jiffies value which is added to now, when there is no timer
* in the timer wheel:
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -443,24 +443,6 @@ unsigned long round_jiffies_up_relative(
}
EXPORT_SYMBOL_GPL(round_jiffies_up_relative);

-/**
- * set_timer_slack - set the allowed slack for a timer
- * @timer: the timer to be modified
- * @slack_hz: the amount of time (in jiffies) allowed for rounding
- *
- * Set the amount of time, in jiffies, that a certain timer has
- * in terms of slack. By setting this value, the timer subsystem
- * will schedule the actual timer somewhere between
- * the time mod_timer() asks for, and that time plus the slack.
- *
- * By setting the slack to -1, a percentage of the delay is used
- * instead.
- */
-void set_timer_slack(struct timer_list *timer, int slack_hz)
-{
- timer->slack = slack_hz;
-}
-EXPORT_SYMBOL_GPL(set_timer_slack);

static inline unsigned int timer_get_idx(struct timer_list *timer)
{
@@ -769,7 +751,6 @@ static void do_init_timer(struct timer_l
{
timer->entry.pprev = NULL;
timer->flags = flags | raw_smp_processor_id();
- timer->slack = -1;
#ifdef CONFIG_TIMER_STATS
timer->start_site = NULL;
timer->start_pid = -1;
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -233,7 +233,6 @@ static void __prandom_timer(unsigned lon

static void __init __prandom_start_seed_timer(void)
{
- set_timer_slack(&seed_timer, HZ);
seed_timer.expires = jiffies + msecs_to_jiffies(40 * MSEC_PER_SEC);
add_timer(&seed_timer);
}

\
 
 \ /
  Last update: 2016-06-17 15:41    [W:0.192 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site